Recent content by Cablegod

Hey guys. I have an all alpine system. W960hdmi, componenets up front, 6.5 in back. 2 12" subs. I'm am using one amp for the speakers and one for the subs. Here's my issue The subwoofers are weak when hooked up to the subw out on back of the HU until I turn the gain over 50%. If I hook...

Alrighty then. The issue has been solved with that. Thanks to everyone for the help. It turned out to be when we put the door speaker back in, a screw caught the wire and shorted it out. Fixed that and now she stays playing! How about amp settings for the speakers (front component and...

Well, the power and ground I am using are from the previous alpine amp that was installed 2 years ago from a local shop. The ground is in the trunk. The previous alpine amp I had, the setttings were all wrong and I would smell the sub getting hot and the amp would get hot. I had to tinker...

Yeah this has me completely stumped. Any ideas anyone has I will try when the sun comes up

Uploaded pic of the box for the info

I attached photo of the box, hopefully you can see it.

I will do that first thing in the morning picking it back up then. Should volts fluctuate on power and ground as volume goes up?

Hey guys, quick question for anyone who may have a good guess to fix this. Put all of this equipment in today replacing all my stock radio. Before I put this on, it was all stock except I did have an alpine 12inch type R sub and an alpine mono block amp. That amp was replaced with the 5...