Recent content by bizkit11

Bump

I'm currently way under powering them, I have a 600 watt Kenwood amp just for the time being and I need to make a new box but I want to work on getting a good, solid amp first. Has anyone ever heard of "Soundstorm" they have a 2500 watt amp for 139. It looks like even if it's not pushing out...

I have two 12" DVC4 Apline type R's, I need to know what size and what brand amp would be suitable for these subs. I don't have alot of money to play with so something in the $200. area (If possible). Any help would be greatly appreciated. Thanks

I've had them in a ported box and it sounded okay somewhere in the 35-37 but when I sealed it I got alot better response somewhere in the low 30's and it was flexin but still didn't sound clean. I heard that Kicker's get loud and low but they are sloppy, What do you think?

What do you all think about these subs JL Audio 12W0v2-4? I presently have 4 12" Kicker CVR and like them there just not the best sounding subs so I was looking to upgrade.

I have alway's used a scrap piece of wood lying around, I never had a problem and I have a 13.5 inch flip-down that way's a ton.

Another solution is if you have any local junk yards you can find your car and cut that one out and replace it on yours to give it a clean stock look then just plug in your aftermarket wiring harness. once you start slicing and dicing into your "factory harness your doomed JK

Sounds like a bad ground, I would start with that.

You can also take the factory radio out and tap into your acc. wire for the factory wiring it's not that hard to do, All you need is a DMM or even a light tester for power. Good luck

I would suggest adding an amp. if you want "full" potential, but if would probably work just fine if you use the rear channels from you hu. If you get an amp. I would get one big enough to power your front and rear speakers that way they'll sound uniform, Just my opinion.

Thanks guy's ! These speakers are all I have to work with at the moment so I have to try and make them work to the best of there ability. Yeah the ports are 2", I got ahold of the installer and explain my concern and he said that he's going to work with the ports alittle better(Not sure what...

Hey guy's, Need some suggestions! Presently I'm running four 12" Kicker crv's dvc4ohm in a ported box, amp i using is a hifonics 2010(I believe). I had to custom box made by a friend of mine that owns he's on shop. I'm not sure of the spec's but i think he said it was tuned to 35-37 hrtz. The...

Yeah at full tilt I'm dropping down in the 12's so I'm keeping an eye on it. I'm probably going to stick with Kinetik, I hear good things about those batteries plus I can alway's add another "after" I upgrade to an HO alt.

Hey Guy's, Got a question in general to my specific set-up. I'm running 4 12" Kicker CRV's with a 2010 Hifonics amp with stock power set-up in a 01 Dodge Dakota 4 door truck. I'm currently running at about 13.8-13.9 at the battery but I would like to see somewhere in the range of 14.1-14.4 if...

As for your gain's every system is different if you don't have way's to check for clipping then you'll have to go by how it sounds.