Recent content by BIG-SMOOTH

  1. B

    10" infinite baffle subs that can take 400+ watts?

    Looks like a custom Fi Q may be an option also. Anything else I should be looking at?
  2. B

    10" infinite baffle subs that can take 400+ watts?

    Other than the IDMax are there any infinite baffle subwoofers out there in a 10" variety that can take 420 watts? I hear good things about the ID, but would like to know if there is anything else worth looking at before making a purchase. Price limit is $400.
  3. B

    Best components with only 70 watts per side?

    I have a kicker ZX550.3 that'll be running my entire setup. The two full range channels are rated at 70x2@4ohms. Right now I'm leaning heavily towards the Pioneer 720PRS, but I'm open to any suggestions for speakers that can be had under $300. I hear nothing but good things about the...
  4. B

    Best soundstage from stock locations?

    I am definitely NOT an SQ competitor. Simply looking to put together a decent system on a relatively tight budget. Here's what I have planned so far... Head Unit: Clarion DXZ775USB Front Stage: Pioneer 6.6" REV components (powered by amplifier) Rear Stage: Pioneer 6.5" REV coaxials...
  5. B

    Best soundstage from stock locations?

    Pottsville is in Schuylkill county.
  6. B

    Best soundstage from stock locations?

    I just purchase a new car yesterday that has 6.5" inch mids in the lower, front part of the doors and a set of tweeters in the panels right by the mirrors at the lower part of the A-pillars. I will be using a Clarion DXZ775USB for my source unit. The head unit has a 3-band parametric equalizer...
  7. B

    Insalling deadener in the cold?

    I just got a roll of Raammat BXT and a few yards of ensolite in the other day to do the doors on my truck. I'd like to get it installed, but I don't have access to a garage large enough to fit my truck and still have room to work and it's only hitting the high 50's outside right now. If I use...
  8. B

    Need a design for 2 Arc d2's.

    I'll be going custom. Got some tight space constraints to work with.
  9. B

    Need a design for 2 Arc d2's.

    I just purchased a pair of Image Dynamics ID8's which are the exact same subs as the Arc's, just a different name. I wanted to go ported, but my standard cab truck won't allow it so I will be putting them in a 0.80^ft (0.36 per sub without displacement) sealed enclosure.
  10. B

    need help picking out some coaxials. ASAP im ordering tonight

    I just purchased a set of the premier series REVs (6.75") for right around $100 including shipping. I had been looking at more expensive coaxials such as diamond, focal, and image dynamics, but after reading all the positive reviews decided to give these a try.
  11. B

    help with ported enclosure for two ID8's

    I have two image dynamics ID8 subs going behind the seats in a standard cab silverado. If someone could confirm my measurements that would be great. H- 14" W- 34" D1- 7.5" D2- 6.5" I will be using a single 3"x10.58" aeroport I'm shooting for 1.29^ft (including .08^ft of driver...
  12. B

    Any 4-channel amps that are 1 ohm stable?

    Anyone know if there are any companies producing 4-channel amplifiers that are stable down to 1 ohm?
  13. B

    Looking for some decent coaxials...

    I've pretty much narrowed it down to these five speakers. I'm basically looking for something that is reasonably priced, will drop right into the stock door locations and run well off the amp I have (70x2@4ohms). Focal 165CV-1 CDT CL-61CV JL Audio XR650CXi Boston Acoustics SL65 Image...
  14. B

    Single 12" sub (relativley shallow, small enclosure)?

    I'm pretty well set on running a pair of SS Rli-8's for my substage, but I want to see if there are any single 12" subs out there that fit my criteria that may be worth looking into. I will be running the sub(s) off a Rockford punch150. I haven't received the amp yet, but the birthsheets I've...
  15. B

    SOLD FS: KnuKonceptz RCA Cables (brand new)

    The subwoofer cable is simply a single RCA cable designed specifically for mono amplifiers. I'm not sure if all mono amps have a single input or not, but the Memphis Belle I had did have that for the sub section. It is not a home audio cable. It is listed on their website in "Knu Products"...
Top