Recent content by Big Reazon

Not worried about left and right separation more interested in frequency separation. I did 2 pairs of seleniums on channels 1and 2 so 4 seleniums then I did a set of crescend0 super tweets on channel 3 but dont know if I can run my another set of mids on channel 4 with tweets on channel 3.

Can I do this my plan was to run the mids parallel 2 per channel. So a pair of seleniums 6 on channel 1. Then a pair of selenium 6s on channel 2. Next a pair of selenium 8s on channel 3. Then a s set of crescendo super tweeters on channel 4. Is this possible I have 2 memphis x03s that I can use...

My finished port size on that box was 5 x 16 and it was an external port what was wrong with that? Will the 5 x20 port on the new box be any good?

Yeah the wood was 1/2" birch but do you guys think the 2 mojo 12s in the 4th order spec'ed out to .75 per sub sealed and 4 cubes ported 100 inches of port area tuned to 47 will play louder and lower than the same subs in a ported enclosure that had 7.5 cubes internal with 120.25" of port area...

What kinda port area would you have had the port at 80 wasn't enough? Is 100 enough for the new box?

Alright so I kinda have a weird shape the box has to be. The last box didn't live up to potential due to so called standing waves. The old box was for a treo ssx 15 sealed was 1.5 ported was 6 tuned to 47 with an external port with 80" port area tuned to 47. Now I want to do a box for my 12s...

Do you have any videos of it in action? What size box and tuning was it in? What kinda numbers was it putting up?

Do you guys think a fi bl 15 will be louder In my current box specs I can go about 3.25 cubes internally And possibly a 6" round port. Or would I be better with 2 jbl p1222 in a 4.25 internally with 2 4" ports. The amp I have is a sundown sae1200d.

Alright right now I have an 08 series mempis mojo 15d2 in a box that is 2.98 cubes internally. The box has two external 4 inch ports. That are 18 inches long ruffly tuned to 33hz. I powered the sub with a sundown sae1200d. Now I want to get louder. I can reface the box for a 12 or a 10 if...

A buddy of mine built a box for a friend of ours using winisd. But as I was looking a it it clearly didn't have enough port area. When I put the box specs in to bass box pro it had 26 m/s of vent air velocity I redesigned a box 1 cube bigger with almost twice as much port area and my vent air...

or even has anyone ever had a loud setup in an el camino

I need more help on this I was going to start a new thread but decided to just revive this one. I just need 2 8s or 10s that will get loud off of the rft10001bd amp in the space I have. I have even considered running a 3 of the 10w6v1s but the box for them to get the air space would need a lot...

http://www.everdrive.com/partdetails.aspx?sku=3083308 You through a connecting rod it looks like. Prolly low on oil and it has been making a slight knocking or ticking noise or you were just revving the hell out of it or it was overheating.

yeah I saw that. But what 2 10s will get really loud of of 1000 watts at 1 ohm?

Looking for some new subs. I ran a memphis mojo 15 sealed i my el camino off of a rf t10001bd it got low as shit but it wasnt really musical. I would port it but not enough space or too complicated of a box. I am looking for 2 10s that would be loud off my amp. I could possible go with one bad...