SOLD fs: 12" audiobahns, Treo Amp, Infinity 12"s

Miles0803

Banned
1,221
0
Sac city
Audiobahn 12" flame series 150 for three+ shipping

Treo ssx 400.1 200 shipped

Infinity 12" subs 100 + 1/2 shpping or 50 each + shipping

i have three 12" audiobahn flame series d4's in a box for 150 plus shipping or 150 local pick up otherwise its $50 a sub plus shipping all are in great working and cosmetic condition

Picture110.jpg


Picture108.jpg


next i have a Treo Engineering Amplifier ssx 400.1 was told by John Henry it will do 900watts at 1 ohm even though treoonline.com says its 400 at 1 ohm. I have only used it for a week to power the infinitys never been hot or abused..asking 250 shipped comes with original box and manuals

Picture107.jpg


Picture103.jpg


Picture102.jpg


then i have two infinity 12" subwoofers d4's. on magnet they say 1235w other than that i know nothing about them have been run off the Treo Amp and they sound great they are in a t-line box. For just the subs i'm asking 100 plus shipping for pair or 50 plus shipping each obo if you want the t-line with its extra....100 plus shipping for t-line or 100 picked up

Picture100.jpg


Picture099.jpg


i have around 550 dollars in court costs and lawyer fees i have to pay need this stuff gone soon

 
ok here are specs

Audiobahns:Size: 12 inch

Recommended RMS Power: 550 watts

Magnet: 120 oz.

Frequency Response: 26Hz-1kHz

Free air resonance (FS): 33.4 Hz

Efficiency: 92.8 dB

PHAT 2" Foam Surround

Non-Pressed, Non-Transfer Paper Cone

KM3 Coated Cone for Low Cone Distortion

Flame-Designed Cast Flame Basket

Lug-Lock Terminals

Impedance: 4 ohms subwoofer wiring options

Vas (equivalent compliance, liters): 49

Vas (equivalent compliance, cu. ft.): 1.71

Mounting Depth: 5 5/8”

Hole Cutout: 11 1/8”

Outer Diameter: 12 3/4”

 
and specs on the infinitys

12" subwoofer

Innovative basket design

Polypropylene woofer cone with large-roll rubber surround

Frequency response: 25-400 Hz

Power range: 60-300 watts RMS (1,000 watts max power)

Sensitivity: 93 dB

Progressive spider design

Top-mount depth: 5"

Impedance: 4 Ohms

High-efficiency polypropylene woofer cones - This lightweight and popular material is used to ensure maximum woofer efficiency. The benefit is high output with modest amplifier power.

Large-roll rubber surrounds - This material provides optimum cone-edge suspension and absorbs distortions that may travel up the cone edge, ensuring clean, tight bass.

Unique In-board Motor Structure - This unique topology reduces the overall mounting depth of the subwoofer. Unlike competing reduced depth subwoofers that only work in vented boxes, the Infinity 1240w works great in both vented and small sealed enclosures.

Vented polepieces - Provides additional cooling of the motor structure is provided. The subwoofer's thermal capablities are augmented, thus increasing power handling.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

  • Locked
I have a treo ssx motor if that interests you at all?
1
2K

About this thread

Miles0803

Banned
Thread starter
Miles0803
Joined
Location
Sac city
Start date
Participants
Who Replied
Replies
122
Views
7,566
Last reply date
Last reply from
Miles0803
IMG_1154.png

GoldCountryCA

    May 5, 2024
  • 0
  • 0
IMG_1153.png

GoldCountryCA

    May 5, 2024
  • 0
  • 0

Latest topics

Top