Someday //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gifThanks guys
And it'd be cool to have an older-body saturn with a big setup in it //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif get on it
I was wanting more like 220-240 //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif200 sq inches of port? LOL jeez :X
For the 4' x 8' sheets I believe theyre like 45ish bucks...the 2' x 4' sheets are 15.XX I believehow much per sheet for your 13-ply birch?
thats tiiiinyYep, 13-ply birch //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
Update hopefully later, I have some time tonight to get some work done but I may just model-up the port so I can start figuring on what dimensions I need...I think im going to go with a 30-31Hz tuning //content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif and 200 sq inches of port...and it looks like im in route for about 11.5-11.75 cubes net but might be a bit more, I'll have to lay it out.
The port will be about 32.5-33" long (33" will get me about 30.8Hz tuning), really not long at all when you look at the design, I was actually expecting it to take up much more room in the trunk but it turns out I'll barely be covering my D3100's in the spare tire well at all //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif And the net cubes is going to be about 12.75-13 after some sketch-up modelingthats tiiiiny
gonna be a super long port