Xero.Limit 10+ year member
Member
I have a Memphis 16-MCD1000 Amp hooked up to one 12" Memphis M3 it's a dual voice coil and I have a Memphis Line Driver 16-VBF1.
With all that said everything was just working fine then I notice my subs cut out I pulled over to see what was going on and I find my Amp going in and out of protect everytime the bass hits and makes a clicking sound. I've searched the forums for a bit and have tried everything that was said to check. First I removed the Line Driver to eliminate that, the problem still occurred. I checked my power wire by the battery to make sure it was secure and not touching anything & also checked my ground. I live in Florida and it does get very hot during the summer and my amp was also hot so I pulled it inside so it can cool. I didn't notice anything wrong with the amp but I haven't opened it because I don't want to void the warranty if there even is still one.
Any advice would be much appreciated thanks in advance.
With all that said everything was just working fine then I notice my subs cut out I pulled over to see what was going on and I find my Amp going in and out of protect everytime the bass hits and makes a clicking sound. I've searched the forums for a bit and have tried everything that was said to check. First I removed the Line Driver to eliminate that, the problem still occurred. I checked my power wire by the battery to make sure it was secure and not touching anything & also checked my ground. I live in Florida and it does get very hot during the summer and my amp was also hot so I pulled it inside so it can cool. I didn't notice anything wrong with the amp but I haven't opened it because I don't want to void the warranty if there even is still one.
Any advice would be much appreciated thanks in advance.