Amp for 4 crv 12s?

  • 4
    Participant count
  • Participant list

harloe

Junior Member
Im looking to get 4 kicker cvr 12s.

# 12" subwoofer with dual 4-ohm voice coils

# Injection-molded polypropylene cone

# Ribbed Santoprene rubber surround

# Suitable for marine use

# Power handling: 50-400 watts RMS (200 watts per coil)

# 800 watts peak power handling

# Frequency response: 25-500 Hz

# Sensitivity: 86.7 dB

# Top-mount depth: 6-1/4"

Could y'all suggest some amps to help power?

 
If you wanna match get a Kicker zx1500.1...does about 1700at 2ohm. Wire the subs in series for a 2ohm final load. Each sub will get about 425rms

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

It would also be easy to add an equalizer to have individual rca inputs for all of the channels. A decent one can be had for less than $40...
6
116
  • Locked
NVX MVPA1 Best tiny amp Installed a bunch, but have one pushing a sealed 12 @ 2ohm in my daily beater Can bump it all day long and barely gets...
4
293
Amp
This tested well on youtube - not familiar with the brand but it is a pretty standard china build house amplifier...
5
303
I agree with every one above. OFC is much better. Copper is a much better conductor than aluminum.
6
362

About this thread

harloe

Junior Member
Thread starter
harloe
Joined
Location
Florida
Start date
Participants
Who Replied
Replies
5
Views
465
Last reply date
Last reply from
kr15
Screenshot_20240518-030709~2.png

1aespinoza

    May 18, 2024
  • 0
  • 0
1000007975.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0

New threads

Top