Zapco Ref 360.4 enough power to run Hertz HSK 165's

[grunt66 10+ year member]

Hi,

I would like to know from those that have used the Zapco Ref 360.4 amp (50 watts X4 at 4 ohms) if the power will be sufficient to power the Hertz HSK 165's (125watts continuous / 250 watts Peak) or the Hertz MlK 165's (150 watts continuous /300 watts peak). I am limited on space with the install ( 2008 Toyota Tacoma double cab). I want to install the amp under the front seat of the vehicle. I am also installing the Hertz HCX 165 coaxial speaker in the rear door.

The Zapco 360.4 will power the front and rear speaker, so the fronts will get 50 watts and the rear will get 50 watts. I was looking at the Zapco 1000.4 but the size is too long to place under the front seat.

I was considering the ARC Kar 300.4 but after listening to the ARC against the Zapco I was sold on the Zapco sound.

I was considering the Alpine PDX-4.150 due to its small installation foot print but I have read mixed reviews about the amp.

My goal is to have a clean sounding system with some volume.

Any and all advice is welcomed. Thanks in advance.

Grunt66

Click to read more...

 

[Macklessdaddy 10+ year member]

Maybe the settings on the amp were different cause they should sound the same

 

[denali804 10+ year member]

your wasting your time sending 50 watts to an mlk. You will need at least 125-150 per mlk to make them sound decent.