Reply to thread

Message

<blockquote data-quote="usamps" data-source="post: 936221" data-attributes="member: 561365">Post email addys for pics.SpecsOutput Power 150 watts/ch @ 4W, 20Hz-20kHz230 watts/ch @ 2W, 20Hz-20kHzT.H.D. + Noise S/N Ratio &amp;gt;105dBDynamic Headroom .6dB @ 2 ohm loadSeparation &amp;gt;70dBDamping Factor &amp;gt;700 @ 4 ohms, 350 @ 2 ohmsInput Type Fully balanced differential REF GNDInput Sensitivity .25 - 5.0 Volts, variableMaximum Input Level 10 Volts R.M.S.Input Impedance 20K ohmsCrossover Range 30Hz - 720HzCrossover Slope Low Pass 12dB, 24dB/octaveHi Pass 12dB/octaveHi Pass T.H.D. + Noise Hi Pass Separation &amp;gt;85dBHi Pass S/N Ratio &amp;gt;120dBMaximum Output Level 10 Volts R.M.S.Power Requirements 60 Amperes max. @ 2 ohmsFuse Rating Dual 20 Amperes - Automotive blade typeMinimum Load 2 ohms stereoIdle Current 1.6 AmperesDimensions 16”L x 5-7/8”W x 2-1/2”H</blockquote>

[QUOTE="usamps, post: 936221, member: 561365"] Post email addys for pics. Specs Output Power 150 watts/ch @ 4W, 20Hz-20kHz 230 watts/ch @ 2W, 20Hz-20kHz T.H.D. + Noise S/N Ratio >105dB Dynamic Headroom .6dB @ 2 ohm load Separation >70dB Damping Factor >700 @ 4 ohms, 350 @ 2 ohms Input Type Fully balanced differential REF GND Input Sensitivity .25 - 5.0 Volts, variable Maximum Input Level 10 Volts R.M.S. Input Impedance 20K ohms Crossover Range 30Hz - 720Hz Crossover Slope Low Pass 12dB, 24dB/octave Hi Pass 12dB/octave Hi Pass T.H.D. + Noise Hi Pass Separation >85dB Hi Pass S/N Ratio >120dB Maximum Output Level 10 Volts R.M.S. Power Requirements 60 Amperes max. @ 2 ohms Fuse Rating Dual 20 Amperes - Automotive blade type Minimum Load 2 ohms stereo Idle Current 1.6 Amperes Dimensions 16”L x 5-7/8”W x 2-1/2”H [/QUOTE]

Verification