Reply to thread

Message: <blockquote data-quote="RumbleNTheTrunk" data-source="post: 1979860" data-attributes="member: 561342"><p>well the class d topology is used for amps that usually power subs.  While most class d's are capable of running in 1 ohm operation some companies choose to modify the amp to only go down to 2 ohms like the memphis mc2000...if its ran down into 1 ohm it will go into protect, a quick mod can solve this, the 2500d uses the same board and it's stable below 1 ohm so a mod to the amp would allow for 1 ohm operation, causing it not to go into protect...iono just an example of a class d thats rated at 2 ohms...but to answer your question most class d amps are stable at 1 ohm.</p></blockquote><p></p>

Top