WTT SSD 12" for motor

[oxsign 5,000+ posts]

1. Product:

^^^^^^^^^^^^

2. Specs:

Fs: 27.0 Hz

Re: 0.75 Ohms/coil

Qms: 4.60

Qes: .52

Qts: .47

Mms: 192g

Cms: 0.18mm/N

Sd: 480cm^2

Vas: 58.7 l

Spl: 85.3dB 1W/1m

Bl: 9.3 N/A

Xmax: 21mm

Rms: 800W

Sealed box: .8-1.6 cuft

Ported box: 1.8-2.5 cuft @ 33Hz

Sub OD: 12.500”

Cut ID: 11.125”

Mounting depth: 6.500”

Displacement: 0.14cuft

3. Description/Condition:

Older double stack in great condition. Used it in my wife's car for 2 months on 600w. Took it out and has been sitting ever since getting dusty. No sagging & still stiff.

4. What you are looking for: :

3" motor. I can add some cash depending to motor

5. Pictures of your item for trade:

Click to read more...

 

[J31Rob 5,000+ posts]

I know a guy with an 05 RE XXX motor.

 

[slvrado28z 10+ year member]

i got a rf power hx2 12" basket and motor 4in coil

 

[oxsign 5,000+ posts]

Yeah, I talked to him and he wasn't interested in the trade.

I also forgot to put that this sub is a D2 ohm.

 

[onelivinlarge 10+ year member]

what kinda motor u looking for?

 

[oxsign 5,000+ posts]

Something good I can build a 15" out of. I have an Alpha Max before and it was a great motor, but im open to anything right now.

 

[oldschool4me 10+ year member]

older db drive platinum plw15? its sitting in storage...the bolts holding the motor in place are a tiny bit loose but the sub still actually works in certain positions....good motor and i do believe they have 3" coils. i was going to try a recone on it but never got around to it as thats the only way to get the the bolts to tighten them. has a nice spoke basket too.

 

[oxsign 5,000+ posts]

I'll have to think about that one. I'm waiting on someone to get back to me about a possible trade, but I haven't heard back yet. I'll post up later.

 

[oldschool4me 10+ year member]

ok just let me know and i can get it out of storage tomorrow and get ya some pics.

 

[oxsign 5,000+ posts]

I'll let you know what happens, thx.

 

[mrmitchell 10+ year member]

I have a DD 9500 motor. I believe its a E or F. Also have a 15 inch kevlar cone

 

[oxsign 5,000+ posts]

I have a DD 9500 motor. I believe its a E or F. Also have a 15 inch kevlar cone

PM sent

 

[oxsign 5,000+ posts]

I'm gonna hold off on all offers at this time. I have a really good offer/trade pending by this weekend. If all goes well, it'll be gone. If not, I'll post back up and taking offers again. Thanks for everything so far!!!!!!!!

 

[mclerico83 5,000+ posts]

I have a old school orion hcca tc9 sub 10, I had one redone by spl to make it a 15. its a 3 inch dual 1 inch slug tc9 motor that you can build it to handle up to 2000rms.