*SOLD* specs on the motor:tripple 3/4 slugs. 3 in coil. 1/4 in gap. shave off of 3.5" coil depth. overall width is 7.5 in. and 4.5 in tall including the pole. weighs just about 40 lbs.
specs on amp: alpine MRV T707. powers up and works, BUT the rca's are a little iffy. they need to be replaced. also, the previous owner used regular screws on this amp...so the threads will need new screws. amp IS a little beat up but but works perfect other than the iffy RCA's.
RMS Power (at 12V,20Hz-20kHz)
Bridged 4 ohms : 240W x 1 (0.3% THD)
Per channel into 2 ohms : 120W x 2 (0.3% THD)
Per channel into 4 ohms : 70W x 2 (0.08%THD)
RMS Power (at 14.4V,20Hz-20kHz)
Bridged 4 ohms : 340W x 1 (0.3% THD)
Per channel into 2 ohms : 170W x 2 (0.03% THD)
Per channel into 4 ohms : 100W x 2 (0.03% THD)
will trade amp for anything, just LMK.....i really want power wire.
specs on amp: alpine MRV T707. powers up and works, BUT the rca's are a little iffy. they need to be replaced. also, the previous owner used regular screws on this amp...so the threads will need new screws. amp IS a little beat up but but works perfect other than the iffy RCA's.
RMS Power (at 12V,20Hz-20kHz)
Bridged 4 ohms : 240W x 1 (0.3% THD)
Per channel into 2 ohms : 120W x 2 (0.3% THD)
Per channel into 4 ohms : 70W x 2 (0.08%THD)
RMS Power (at 14.4V,20Hz-20kHz)
Bridged 4 ohms : 340W x 1 (0.3% THD)
Per channel into 2 ohms : 170W x 2 (0.03% THD)
Per channel into 4 ohms : 100W x 2 (0.03% THD)
will trade amp for anything, just LMK.....i really want power wire.
Last edited by a moderator:
