im taking a break from car audio and i could use some xtra cash so hope you guys can help me out thanks....alo local or sumwhat local deals are kool...willing to meet also
1. Products:
Alpine 9886 HU
Soundstream DTR3400
MCR 250A EXT. REG. HO alt FORD 4G
16ft+ Tsunami comp 1/0 Blue
13ft welding wire 2/0 black
6-8 ft black 1/0 ofc used for big 3
mmats proaudio dreadnaut 3" coil motor dual 1" slug motor
4 AQ 6.5s pro audio & 2 Crescendo XST2 ST's
2. Specs:
Alpine 9886 HU
Alpine Electronics of America, Inc.
Soundstream DTR3400
http://www.woofersetc.com/p-8645-dtr...amplifier.aspx
MCR 250A EXT. REG. HO alt FORD 4G
96-01 Taurus 3.0L DOHC
16ft+ Tsunami comp 1/0 Blue
no burns cuts 1/o OFC
13ft welding wire 2/0 black
no burns or cuts 2/0 OFC welding wire
6-8 ft black 1/0 ofc used for big 3
metra OFC and sum monster n tsunami 1/0 all OFC used for big 3
mmats proaudio dreadnaut 3" coil motor dual 1" slug motor
3" COIL motor very beefy weighs 28lbs
4 AQ 6.5s pro audio
AQ-MR6.5 (Sold As Pair)
2 Crescendo XST2 ST's
Crescendo Audio | The Logical Choice
3. Descriptions/Condition of all items:
Alpine 9886 HU 7/10...play button faded like most and imprid switch on chasis is broke off but can be switched with a small flathead...its now set to internal amp.
Soundstream DTR3400 9/10 very good condition only marks are next to the screws on the power and speaker terminals where the screw driver rubbed a mark on the black plastic molding
MCR 250A EXT. REG. HO alt FORD 4G
this alt is very solid i never had a chance to clamp but i did run the DTR @ .25 of and it was a beats dropped to 12.3 only a few times full tilt. only install since spring and it was bought in december very low hours and never had a problem
16ft+ Tsunami comp 1/0 Blue
its oversized OFC great wire
13ft welding wire 2/0 black
not very flexable but carrys tons of current
6-8 ft black 1/0 ofc used for big 3
mis matched pieces of 1/0 all good OFC wire tho. used for big 3 all has solid closed end lugs soldered
mmats proaudio dreadnaut 3" coil motor dual 1" slug motor
great motor i was gonna build into a beefy 15
4 AQ 6.5s pro audio & 2 Crescendo XST2 ST's
the tweets n mids r both used and in good condition...one of the mids had a dented cap but i fixed it w a piece of tape...all works well
4. Total Price: :
Alpine 9886 HU - 160$ shipped
Soundstream DTR3400 - 300$ + shipping
MCR 250A EXT. REG. HO alt FORD 4G - transpo regulater and HO alt 300$ shipped
16ft+ Tsunami comp 1/0 Blue - all wire for 100$ shipped
13ft welding wire 2/0 black - all wire for 100$ shipped
6-8 ft black 1/0 ofc used for big 3 - all wire for 100$ shipped
mmats proaudio dreadnaut 3" coil motor dual 1" slug motor - 80$ shipped
4 AQ 6.5s pro audio & 2 Crescendo XST2 ST's - 120$ shipped
WILL MAKE DEALS ON MULTIPLE ITEMS
1200$ SHIPPED FOR IT ALL
900$ PICKED UP
5. Pictures:
(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).
SacTownBully84
1. Products:
Alpine 9886 HU
Soundstream DTR3400
MCR 250A EXT. REG. HO alt FORD 4G
16ft+ Tsunami comp 1/0 Blue
13ft welding wire 2/0 black
6-8 ft black 1/0 ofc used for big 3
mmats proaudio dreadnaut 3" coil motor dual 1" slug motor
4 AQ 6.5s pro audio & 2 Crescendo XST2 ST's
2. Specs:
Alpine 9886 HU
Alpine Electronics of America, Inc.
Soundstream DTR3400
http://www.woofersetc.com/p-8645-dtr...amplifier.aspx
MCR 250A EXT. REG. HO alt FORD 4G
96-01 Taurus 3.0L DOHC
16ft+ Tsunami comp 1/0 Blue
no burns cuts 1/o OFC
13ft welding wire 2/0 black
no burns or cuts 2/0 OFC welding wire
6-8 ft black 1/0 ofc used for big 3
metra OFC and sum monster n tsunami 1/0 all OFC used for big 3
mmats proaudio dreadnaut 3" coil motor dual 1" slug motor
3" COIL motor very beefy weighs 28lbs
4 AQ 6.5s pro audio
AQ-MR6.5 (Sold As Pair)
2 Crescendo XST2 ST's
Crescendo Audio | The Logical Choice
3. Descriptions/Condition of all items:
Alpine 9886 HU 7/10...play button faded like most and imprid switch on chasis is broke off but can be switched with a small flathead...its now set to internal amp.
Soundstream DTR3400 9/10 very good condition only marks are next to the screws on the power and speaker terminals where the screw driver rubbed a mark on the black plastic molding
MCR 250A EXT. REG. HO alt FORD 4G
this alt is very solid i never had a chance to clamp but i did run the DTR @ .25 of and it was a beats dropped to 12.3 only a few times full tilt. only install since spring and it was bought in december very low hours and never had a problem
16ft+ Tsunami comp 1/0 Blue
its oversized OFC great wire
13ft welding wire 2/0 black
not very flexable but carrys tons of current
6-8 ft black 1/0 ofc used for big 3
mis matched pieces of 1/0 all good OFC wire tho. used for big 3 all has solid closed end lugs soldered
mmats proaudio dreadnaut 3" coil motor dual 1" slug motor
great motor i was gonna build into a beefy 15
4 AQ 6.5s pro audio & 2 Crescendo XST2 ST's
the tweets n mids r both used and in good condition...one of the mids had a dented cap but i fixed it w a piece of tape...all works well
4. Total Price: :
Alpine 9886 HU - 160$ shipped
Soundstream DTR3400 - 300$ + shipping
MCR 250A EXT. REG. HO alt FORD 4G - transpo regulater and HO alt 300$ shipped
16ft+ Tsunami comp 1/0 Blue - all wire for 100$ shipped
13ft welding wire 2/0 black - all wire for 100$ shipped
6-8 ft black 1/0 ofc used for big 3 - all wire for 100$ shipped
mmats proaudio dreadnaut 3" coil motor dual 1" slug motor - 80$ shipped
4 AQ 6.5s pro audio & 2 Crescendo XST2 ST's - 120$ shipped
WILL MAKE DEALS ON MULTIPLE ITEMS
1200$ SHIPPED FOR IT ALL
900$ PICKED UP
5. Pictures:
(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).
SacTownBully84
