WTB/WTT- Kicker Distro Blocks and Fuseholder

[theothermike 10+ year member]

Hey guys. im intrested in redoing my wiring and would really like to switch my wire and wiring assessories around.

Im intrested in obtaining either of the following stuff and will buy / trade for it:

-2x Kicker Distribution Blocks. The ones that look like a fork and are in the pkd01 and

pkd4 kits.

-2x Kicker Anl FuseHolders. Fuses arn't needed.

Whats for trade:

1x Stinger 20 Channel 6m/20' Bullet Series RCA's

1x Knukonceptz Krystal Blue 4 Channel 6m RCA's

1x Knukonceptz Krystal Blue 2 Channel 6m RCA's

1x Stinger Open End Ring Terminal Style ANL Fuseholder

2x Knukonceptz ANL INLINE Fuseholders Barewire

Various lengths of Knukonceptz Kollosus Silver and Blue 4 Guage Wire. 4', 6', 3', 5' etc... I have to check.

Various lengths of Knukonceptz KLM 1/0 Gauge Blue and Silver Wire. 2', 5', 6' etc...

Various lengths of Knukonceptz Klear 16 gauge and 10 gauge speakerwire runs.

6' of Blue Kollosus Knukonceptz Kollosus 8 gauge and 6' of Silver 8 gauge as well.

1x Knukonceptz ground distrobution block

2x Knukonceptz fused distrobution blocks with lots of 120 mini anl fuses.

2x Set screw ring terminals alumapro.

2x 1 Female 2 Male Kicker K series RCA Adapters

Also have a Pioneer 880 PRS For sale that in excellent cosmetic shape. Has extra mounting hardware, remote, protective case, wiring harness, cage, and the manual is available online. RCA's are grounded out there is Zero Noise. 220 shipped!!!! Or ft for: alpine 9887, semi trade + cash for clarion 9255 or denon unit.

And of course i have cash if you cant find anything you want.

and i also have lots of paintball gear as well. i can take pics of everything just let me know what you want pics of. some i have already.

Mike-

References listed below.

Click to read more...

 

[theothermike 10+ year member]

i'm pending sale for 2 kicker distros to kingdell right now. will update after

 

[audiobahnuser18 5,000+ posts]

i have kicker distro. would trade for these 1x Knukonceptz Krystal Blue 2 Channel 6m RCA's

got pics? if that deal falls through i got dibs.

 

[jco1385 5,000+ posts]

i have 2 of the kicker distros. currently using them, but would trade if you had some equal to what i need.

maybe these:

1x Knukonceptz ground distrobution block

2x Knukonceptz fused distrobution blocks with lots of 120 mini anl fuses.

any info on them? what ga in/out? how many in/outputs?

 

[theothermike 10+ year member]

jco what u looking for. and audiobahnuser. if your kicker block is in good shape as in the cover snaps in fine and isnt broken then u got a deal.

he backed out of a trade for battery terminals and set screw ring terms.

so your guys offers are looking good.

mike-

 

[jco1385 5,000+ posts]

jco what u looking for. and audiobahnuser. if your kicker block is in good shape as in the cover snaps in fine and isnt broken then u got a deal.
he backed out of a trade for battery terminals and set screw ring terms.

so your guys offers are looking good.

mike-

re-read. any info on those?

and i also have a kicker ANL holder. if i was to trade that, i have to get one that has 0/1 in/out

 

[theothermike 10+ year member]

the ground block has 2 1/0gauge input and 3 4 gauge outputs but i also have other fittings for 4 gauge inputs and 8 gauge outputs. the knukonceptz fused distros are: 1 block has a 4 gauge fitting in and 2 4 gauge fittings out, can be 8 gauge fittings out, and the other has a 1/0 gauge in fitting and 2 4 gauge fittings out. i have tons of fittings. but only 3 1/0 gauge fittings that can be used on either of the input outputs. the ground block is a common block so the 1/0 gauge input can be an output and the 3 4 gauge outputs can be inputs. these blocks depends on what fitting u screw in to use. and as said they are interchangeable between the blocks so if u needed a 1/0 gauge input on the fused block that has a large 4 gauge input you could swap with 1 of the ground blocks fittings and put the 4 gauge in the ground block.

i have like 6-7 8 gauge fittings, 6-7 4 gauge fittings and 3 1/0 gauge fittings.

mike-

id do all 3 knukonceptz distros + all my 120 mini-anl fuses (10 or so) for your 2 kicker blocks with covers if they arnt broken. and snap in. and the block doesnt have missing screws. i have all the covers for my distros.

let me know

 

[jco1385 5,000+ posts]

thats kind of hard to read.

what i would need:

0/1 input and 0/1 and 4ga output on both blocks.

and my distros are like new, no broken anything and all screws.

the ANL holder is missing one of the 2 screws for the cover

 

[theothermike 10+ year member]

i also have a 1/0 gauge in out knukonceptz inline fuseholder anl that i can trade for the kicker 1. and if u want to keep the 300 amp fuse or whatever size fuse you have than thats cool cause i have 250 amp ones. but looking for 300 amp.

i can do 2 fused distro's + ground distro + anl inline fuse holder + mini-anl fuses + all my fittings for your 2 distros and 1 fuseholder and we can keep anl fuses that we have?

Mike-

links to my products

ground block - http://knukonceptz.com/productDetail.cfm?prodID=KND-23

fused distros - http://knukonceptz.com/productDetail.cfm?prodID=KNF-12

fuseholder - http://www.knukonceptz.com/productDetail.cfm?prodID=FH-20

 

[audiobahnuser18 5,000+ posts]

theothermike the kicker distro is in mint condition man nothing wrong with it at all im just going all knukonceptz. i got it in a trade and never even used it. i can take pics if youd like?

 

[audiobahnuser18 5,000+ posts]

Just took pic now man here you are man.

 

[jco1385 5,000+ posts]

i also have a 1/0 gauge in out knukonceptz inline fuseholder anl that i can trade for the kicker 1. and if u want to keep the 300 amp fuse or whatever size fuse you have than thats cool cause i have 250 amp ones. but looking for 300 amp.
i can do 2 fused distro's + ground distro + anl inline fuse holder + mini-anl fuses + all my fittings for your 2 distros and 1 fuseholder and we can keep anl fuses that we have?

Mike-

links to my products

ground block - http://knukonceptz.com/productDetail.cfm?prodID=KND-23 i could use this, as it will allow 0/1 in and 0/1 and 4ga out

fused distros - http://knukonceptz.com/productDetail.cfm?prodID=KNF-12this will not do 0/1 out

fuseholder - http://www.knukonceptz.com/productDetail.cfm?prodID=FH-20does this use mini-anl? if not, i could use it also

...

 

[theothermike 10+ year member]

well i cant deal for the anl fuseholder jco.

and that blocks looks great audiobahnuser. the guy recently responded to me again and we might still be able to work something out like we originally planned. keep you updated.

and jco as far as the knukonceptz distros go. read it on http://www.knukonceptz.com they explain it the best.

but the blocks allow for a 1/0 gauge in and 2x 4 gauge outs at the biggest wire possible. they dont have a 1/0 gauge in and out. sorry. the ground block has 2 1/0 gauge ins or outs and 3 4 gauge ins or outs at largest. so if you want to trade 1 kicker distro for that block i can trade you the ground block + some extra fittings and maybe a ring terminal or two and i can then snag audiobahusers other distro for my rca's.

Mike-

 

[audiobahnuser18 5,000+ posts]

the other mike u have pm back.

 

[theothermike 10+ year member]

fuseholder doesnt use a mini-anl. it uses an ANL fuse. i have a 250amp in mine.

Mike-