WTB: Old equipment

[6spdcoupe 5,000+ posts]

Like the title states..lookin for older products moreso amps and HUs. Circa late 80s-late 90s. Not interested in much past Y2K. Working or not (please specify if not). Cosmetics should be at least 8/10. Will also trade new/current products if your in need/search of something.

Show me what you have..//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

Click to read more...

 

[6spdcoupe 5,000+ posts]

i got a sony xm-600 from along time ago puts out like 14 x 4 @ 4 ohms. Neat little amp for something like lowpower tweets. 10 + shipping

Is that one of the champagne colored ones?

 

[PESteele 10+ year member]

its grey

 

[6spdcoupe 5,000+ posts]

Hrmmm trying to picture it..

 

[PESteele 10+ year member]

ill get you a picture

 

[david in german 10+ year member]

need to login to view. //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

I have some oldschool stuff that I am putting up on the block.

1- Pioneer GM-h50 25X2 at 4ohm and 12v (has a replacement screw for the power connection) $40.00 Plus shipping

1- Pioneer GM-h100 50X2 at 4ohm and 12v $50.00 Plus shipping

I also have an oldshool Pioneer Xover 2way $25.00 Plus shipping

All of the amps are non current limited and work good.

ESX HM 10" dvc subs. They need .4cf airspace sealed each. $100.00 Plus shipping for the pair.

1 Hifonics Series VIII Vulcan amp Missing power and speaker connections but you can order them from any Hifonics dealer

$75. Plus shipping

Also Feeler for 4 Kicker 8" solobarics S8A's these are the first series of Solobarics and need .33cf sealed airspace and are recommended 300w rms. I have been running them with about 150-200w Each

Looking for about $250. for the set and I will throw in the grills with them.

 

[6spdcoupe 5,000+ posts]

I have some oldschool stuff that I am putting up on the block. 1- Pioneer GM-h50 25X2 at 4ohm and 12v (has a replacement screw for the power connection) $40.00 Plus shipping

1- Pioneer GM-h100 50X2 at 4ohm and 12v $50.00 Plus shipping

I also have an oldshool Pioneer Xover 2way $25.00 Plus shipping

All of the amps are non current limited and work good.

ESX HM 10" dvc subs. They need .4cf airspace sealed each. $100.00 Plus shipping for the pair.

1 Hifonics Series VIII Vulcan amp Missing power and speaker connections but you can order them from any Hifonics dealer

$75. Plus shipping

Also Feeler for 4 Kicker 8" solobarics S8A's these are the first series of Solobarics and need .33cf sealed airspace and are recommended 300w rms. I have been running them with about 150-200w Each

Looking for about $250. for the set and I will throw in the grills with them.

I might be interested in the two Pioneer amps and the HiFonics...Wanna put together something for all three? What about the RFs I see there? //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Oh your in Germany? Hmmm

 

[david in german 10+ year member]

I might be interested in the two Pioneer amps and the HiFonics...Wanna put together something for all three? What about the RFs I see there? //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
Oh your in Germany? Hmmm

I am US Military in Germany so it would be like shipping from NY //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif Fosgate are all my personal collection (not for sale) the Pioneer's and the Hifonics No problem.

The Hifonics is hard wired power and ground though. I can get you a pic if you like. PM me with an offer (shipped) You need the crossover too?

 

[PESteele 10+ year member]

 

[Beat_Dominator 5,000+ posts]

I have a NIB Pioneer Premier TSW-1040C. I wub it //content.invisioncic.com/y282845/emoticons/cuddle.gif.bd1b29c179c0482f8313dbd790b74c94.gif

 

[johnecon2001 5,000+ posts]

Hrm... I can play too.

I'm limited on pics... left my camera at work.

The only thing I might want to hold onto is the alpine, other than that, if you wanna pay shipping and give me some future love for the rest.. that'd be kewl.

Alpine 3527S 4-channel amp (with the Duo-B circuit)

- missing 4 of the 8 speaker screws. a few small scratches, otherwise in perfect condition.

Old school Denon DCA-3150 (1991 vintage)

A Money-saving alternative to the higher powered 4-channel system is DENON's DCA-3150, a 4-channel power amp for the car rated at 12W x 4.

~ isolated ground

~Variable input Sensitivity

~DC power Terminal Bock

~Heavy-Duty Speaker Terminals

~Over-Temp/Over-Current Protection Circuit

~Power indicator

~Remote Power On/Off

Specs:

4 Channels

Speaker Impedance 4ohm

12W x 4 into 4ohms 20Hz-20kHz

0.5% THD

16W X 4 into 4ohms 1khz 1% THD

Freq response 20Hz-50kHz

Signal-to-Noise Ratio 90dBA

Input Sensitivity 02.-2V 10kohms

Dimensions (mm/kg) 232x44x152 / 1.3







Nakamichi RD-260 (*gasp* a cassette deck with PREOUTS!!)

Can't tell you much about this one, searched for a bit, couldn't find much of anything. I know the radio works, don't know about the tape deck

 

[pik 10+ year member]

Hey Don,

I got an old Orion cobalt 260 these were the first ones with heatsinks like the HCCA's

 

[PESteele 10+ year member]

if your interested pm me

 

[Louisiana_CRX 5,000+ posts]

 

[6spdcoupe 5,000+ posts]

Hrm... I can play too.I'm limited on pics... left my camera at work.

The only thing I might want to hold onto is the alpine, other than that, if you wanna pay shipping and give me some future love for the rest.. that'd be kewl.

Alpine 3527S 4-channel amp (with the Duo-B circuit)

- missing 4 of the 8 speaker screws. a few small scratches, otherwise in perfect condition.

Old school Denon DCA-3150 (1991 vintage)

A Money-saving alternative to the higher powered 4-channel system is DENON's DCA-3150, a 4-channel power amp for the car rated at 12W x 4.

~ isolated ground

~Variable input Sensitivity

~DC power Terminal Bock

~Heavy-Duty Speaker Terminals

~Over-Temp/Over-Current Protection Circuit

~Power indicator

~Remote Power On/Off

Specs:

4 Channels

Speaker Impedance 4ohm

12W x 4 into 4ohms 20Hz-20kHz

0.5% THD

16W X 4 into 4ohms 1khz 1% THD

Freq response 20Hz-50kHz

Signal-to-Noise Ratio 90dBA

Input Sensitivity 02.-2V 10kohms

Dimensions (mm/kg) 232x44x152 / 1.3







Nakamichi RD-260 (*gasp* a cassette deck with PREOUTS!!)

Can't tell you much about this one, searched for a bit, couldn't find much of anything. I know the radio works, don't know about the tape deck

PM sent sir. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[6spdcoupe 5,000+ posts]

Hey Don,
I got an old Orion cobalt 260 these were the first ones with heatsinks like the HCCA's

depends on the amount. Unfortunately the Cobalts were the les desirables..

 

[6spdcoupe 5,000+ posts]

So when we gonna talk? //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Louisiana_CRX 5,000+ posts]

I got rid of one of my older pieces a few weeks ago an Advent 250 the football shaped amp with the amber display lights on top..it was very clean...I always liked the looks of those amps...//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[6spdcoupe 5,000+ posts]

I got rid of one of my older pieces a few weeks ago an Advent 250 the football shaped amp with the amber display lights on top..it was very clean...I always liked the looks of those amps...//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Yes they were nice. I havent seen/owned one for prolly about 6yrs now..

 

[Louisiana_CRX 5,000+ posts]

How about a USAcoustics USA 6300....6 ch...very clean sounding zed amp with a great crossover section....//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Louisiana_CRX 5,000+ posts]

A Crossfire CFA555 5 ch....