WTB: Kicker ZR360 - Zapco 300x or C300

[hybridamp 10+ year member]

Looking for a Kicker ZR360

Zapco Studio 300x or C300

Click to read more...

 

[MustangGT25YRS 10+ year member]

Hello,

I have a ZR/360 thats I bought used...and never tried to hook it up.It's been sitting "Inside my House" since I bought it.I thought that I was going to use it...but got a ZR/600 instead for my front stage.

Don't know off the top what I'd sell it for.I just went and looked at it,and I have End Caps on it.It sdidn't come with the amp.It has the Newer style ZR/360 Amp Badge...not the older rectangular one.

I sanded the heat sink tops down to give it the polished fin look like Kicker made for a few years.It came all black.It didn't have the Beauty Box/ Owner's Manual or Birth Sheet when I bought it //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif I would have to try it out to make sure that it works...before I'd even consider selling it,Hybrid.I would be very annoyed if it doesn't.It had better work!!.

I don't know how to put Pics up on the Computer yet...but would ask my Neighbor if she would...'cause she knows how.I'll take the bottom cover off to show you the Inside and all 4/sides.There are some small paint chips that were there when I received it..to be honest and to let you know up front.It has a Module,that I'll have to check and see which one. I'll let you know soon...unless you get something else before that,which I understand.Take Care.

*Kind Regards*

*[Tinkker/1948]*

 

[hybridamp 10+ year member]

Thanks for the reply.

I ended up grabbing a ZR600 a few days ago... Though mine is all black also and I had the same idea as you in regards to sanding the top of the heatsink fins to give it that newer-style polished look. How did yours turn out?

 

[MustangGT25YRS 10+ year member]

Thanks for the reply.
I ended up grabbing a ZR600 a few days ago... Though mine is all black also and I had the same idea as you in regards to sanding the top of the heatsink fins to give it that newer-style polished look. How did yours turn out?

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

I HATE YOU !!!!!!!.......Nawh J/K/.Congrats to you.//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

It came out nice.I had to start off with some course sand paper...then go up to I believe 400~Grit.I also did My ZR/1000 And my ZR/600 the same way...I like it it very much as compared to the All Black Look. I think you'll like it yourself once it's done....as a matter of fact you'll love it...Really.Maybe take some Painter's Tape and cover up the ends for Pow./Grnd. and Spkr. Cable to keep the metal filings out of them and the amp.Keep your vacuum handy.

Ohhh Sh!t.I used my palm sander when I first started to sand the heatsinks.Depending on how thick the powder coat was applied....you'll be best off.Than I used a sanding block,and sanded "With the Grain...sorta speak"

Please show or pm me some pics if you will????.I'd like to see it.If I'm not being nosey...where did you purchase the amp?.Take Care.

*Kind Regards*

*[Tinkker/1948]*