WTB: amp for xxx mids

[zachzchw 5,000+ posts]

Needs to do 200 x2 at 2 ohms.

Preferably a 4 channel, so I can run my tweets on it too.

Click to read more...

 

[dak0ta_g33k 10+ year member]

not meaning to thread dump, but i do ok with 150wx2 @ 2ohms outta my mxa6004 into my xxx mids wired to cd1es via cs1.x crossovers. can push the xxxs to distortion with minimal gains set. running regular RE component set off the remaining two channels, 75wx2 @ 4ohms and the amp stays reasonably warm.

GL with what you end up running //content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif

 

[davidfre21 5,000+ posts]

got a JBL gto75.2, pretty much new

150x2@2ohm

100+shipping

 

[cd6551 10+ year member]

ive got a directed 500/2 that does 200 rms at 2 ohms. ill let it go for 125ish shipped

 

[jadeaudio 10+ year member]

I have a VooDoo V400.4 4 channel amp. It does 100 watts x 4 at 2 ohm and can do 200 watts x 2 at both 4 or 2 ohm. This is brand new. $150. If interested email me at Jadeaudio@aol.com.

 

[vette1 10+ year member]

NEW!!! This amp is VERY under rated. I would say it puts out almost double what is advertised. I have seen this amp push 2 competition 12's extremely Hard. 380 Positive Feedback on Ebay. My Brother Ran one of these in his Camaro, 2 channels to a set of 25mm Titanium Bullet Tweeters. The other 2 channels pushed a set of American Bass Cast 12's.

RMS AT 2 Ohm Stereo 80Wx4CH

RMS at 4 Ohm Stereo 60WX4CH

RMS at 4 Ohm Mono 130WX2CH

MAX at 2 Ohm Stereo 150WX4CH

S/N Ratio > 100db

Channel Seperation > 55db

Input Sensitivity 0.15V - 5V

Input Impedance 47K Ohm

Slew Rate 10V /Usec

Damping Factor 200 at 4 Ohm

Fuse Rating 25A x 2

Width 9.54"

Height 2.13"

Length 13.78"

$160 Shipped

 

[zachzchw 5,000+ posts]

NEW!!! This amp is VERY under rated. I would say it puts out almost double what is advertised. I have seen this amp push 2 competition 12's extremely Hard. 380 Positive Feedback on Ebay. My Brother Ran one of these in his Camaro, 2 channels to a set of 25mm Titanium Bullet Tweeters. The other 2 channels pushed a set of American Bass Cast 12's.
RMS AT 2 Ohm Stereo 80Wx4CH

RMS at 4 Ohm Stereo 60WX4CH

RMS at 4 Ohm Mono 130WX2CH

MAX at 2 Ohm Stereo 150WX4CH

S/N Ratio > 100db

Channel Seperation > 55db

Input Sensitivity 0.15V - 5V

Input Impedance 47K Ohm

Slew Rate 10V /Usec

Damping Factor 200 at 4 Ohm

Fuse Rating 25A x 2

Width 9.54"

Height 2.13"

Length 13.78"

$160 Shipped

Might want to tell me what amp it is......

 

[vette1 10+ year member]

Might want to tell me what amp it is......

Oppps Its an American Bass SQ-480