Sold WTB: 15" Surround & 8.5" Spiders

theater_lover

Junior Member
Rating: 0%
0 0 0
I have an unusual repair and while I have a couple leads, am wondering if anyone has, or can point me towards the following:

I am looking to buy a beefy 15" surround, preferably without a cone, but a cone could work. Needs to have 2+ inches of excursion. Ideally it would be 15.35" on the outer, 11" on the inner, with a .4" flat lip on both sides. Butyl Rubber preferred, but foam could work.

Also looking for 3" voice coil spiders that are 8.5" (218mm) on the outside (.33" lip included) and 3.01" (78mm). I am not sure of the stiffness - if someone has a test I can do to know, please let me know, but I think they are stiff.

Thanks.

 
woofercooker has 8.4'' spiders dirt CHEAP and teampsi might be able to help you out

I have an unusual repair and while I have a couple leads, am wondering if anyone has, or can point me towards the following:
I am looking to buy a beefy 15" surround, preferably without a cone, but a cone could work. Needs to have 2+ inches of excursion. Ideally it would be 15.35" on the outer, 11" on the inner, with a .4" flat lip on both sides. Butyl Rubber preferred, but foam could work.

Also looking for 3" voice coil spiders that are 8.5" (218mm) on the outside (.33" lip included) and 3.01" (78mm). I am not sure of the stiffness - if someone has a test I can do to know, please let me know, but I think they are stiff.

Thanks.
 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

theater_lover

Junior Member
Thread starter
theater_lover
Joined
Location
Albany, NY
Start date
Participants
Who Replied
Replies
2
Views
371
Last reply date
Last reply from
woofercooker
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top