Reply to thread

Message: <blockquote data-quote="Immacomputer" data-source="post: 3651400" data-attributes="member: 570419"><p>If you cut an 1/8" off, you would have 11.25" diameter instead of 11.125".</p><p></p><p>If you're set on replacing it, your best bet is to see if it fits as is. If not, grab some 40 grit sand paper and sand the edges until it fits. It doesn't take too long to sand the opening 1/16".</p></blockquote><p></p>

Verification

Top

Menu