Reply to thread

Message: <blockquote data-quote="m0nk3n" data-source="post: 8514911" data-attributes="member: 670521">so i got a Hertz Dieci HDBPK6 system in the car.the mono amp supports 2 and 4 ohm setups. the subwoofers is at 4 ohm.what i want to get done is wire the subs into the mono amp at 2 ohm.the subs connected as is now only draws about 300rms(ISH) and i'd calculated if i get the subs connected to the amp in a 2 ohm state considering the advertised 550rms on the amp should draw around 498.xxx rms.the subs are not wired together they just connects out each output on the side of the bass box and then they connected together on the positive on 1 output and negative on the other output.the amp is mono with 2 pos. and 2 neg. outputs...</blockquote>

Top