Reply to thread

Message: <blockquote data-quote="Innovative:Cory" data-source="post: 4486049" data-attributes="member: 589885"><p>FYI.... the easiest place to run a power wire through the firewall in a 4th gen camaro is this... under the hood on the passenger side...remove the 2 10mm bolts holding the ecu in place....lift the ecu out and set it to the side... there you will see a grommet that you can pass up to a 1/0 cable through with ease...hope this helps and this is the easiest way to do this car...  if you are on the drivers side and need a spot to run a small gauge wire (i.e siren, strobe, foglights, hoodpin, tachwire, etc..)... you can get a wire insertion tool to go through the grommet for the hood release cable...these two spots are common regardless of engine/transmission....</p></blockquote><p></p>

Top