Reply to thread

Message

<blockquote data-quote="Quick" data-source="post: 7744766" data-attributes="member: 641744">I keep seeing top 10&#039;s and the kenwood KAC 7204 is always several spots above my kicker zx250.2! But I doesn&#039;t hit as hard as m kicker I don&#039;t feel like! Is this amp really that much better? Has higher rms and everything but idk! Help plz. I have both amps and I wanna know which is better to use!Kenwood specs:CEA Rated: 170W X 2 (1.0% THD+N) (4Ohm/2Ch)• 250 Watts x 2 (2 ohm)/500 Watts x 1 (4 Ohm Bridged)• High Quality Speaker Level Input• Blue Illumination• High-pass (12 dB per octave) and low-pass (24 dB per octave) filters variable from 50 to 200 Hz• Variable Bass Boost Control(0-18 dB at 40 Hz)• Cooling Fan• MOSFET power supply• Speaker-level inputs with signal sensing turn-on• Preamp-level inputs and outputs• Fuse rating: 40A x 1Kicker specs:85 watts RMS x 2 at 4 ohms125 watts RMS x 2 at 2 ohms250 watts RMS x 1 in bridged modeunregulated Class A/B power supply offers a significant increase in power at 2 ohmsstereo or bridged mono output4-ohm stable in bridged modeTri-Way capable3-way protection circuitryspeaker- and preamp-level inputsbass boost (0-18 dB) centered at 40 Hzvariable high-/low-pass crossover (50-200 Hz, 12 dB per octave)frequency response 20-20,000 Hzpreamp outputs (pass full-range signal to another amp)</blockquote>

[QUOTE="Quick, post: 7744766, member: 641744"] I keep seeing top 10's and the kenwood KAC 7204 is always several spots above my kicker zx250.2! But I doesn't hit as hard as m kicker I don't feel like! Is this amp really that much better? Has higher rms and everything but idk! Help plz. I have both amps and I wanna know which is better to use! Kenwood specs: CEA Rated: 170W X 2 (1.0% THD+N) (4Ohm/2Ch) • 250 Watts x 2 (2 ohm)/500 Watts x 1 (4 Ohm Bridged) • High Quality Speaker Level Input • Blue Illumination • High-pass (12 dB per octave) and low-pass (24 dB per octave) filters variable from 50 to 200 Hz • Variable Bass Boost Control(0-18 dB at 40 Hz) • Cooling Fan • MOSFET power supply • Speaker-level inputs with signal sensing turn-on • Preamp-level inputs and outputs • Fuse rating: 40A x 1 Kicker specs: 85 watts RMS x 2 at 4 ohms 125 watts RMS x 2 at 2 ohms 250 watts RMS x 1 in bridged mode unregulated Class A/B power supply offers a significant increase in power at 2 ohms stereo or bridged mono output 4-ohm stable in bridged mode Tri-Way capable 3-way protection circuitry speaker- and preamp-level inputs bass boost (0-18 dB) centered at 40 Hz variable high-/low-pass crossover (50-200 Hz, 12 dB per octave) frequency response 20-20,000 Hz preamp outputs (pass full-range signal to another amp) [/QUOTE]

Verification