Reply to thread

Message: <blockquote data-quote="ejschultz" data-source="post: 6181084" data-attributes="member: 603800"><p>If I'm using the DMM to measure the voltage coming out of the amp, that voltage is an AC voltage in the frequency of the test tone. If the test tone is 1000 Hz, the meter should be able to measure AC voltages in frequencies up to 1000 Hz. The meter I purchased only goes up to 400 Hz. That's the limit for most meters. Some go up to 1000 Hz. I'm sure there's some that go even higher than that, but I haven't seen any because I'm not looking at anything above $100.</p></blockquote><p></p>

Top