Reply to thread

Message: <blockquote data-quote="SlugButter" data-source="post: 8697787" data-attributes="member: 678073"><p>I bought a 99 dollar Ryobi table saw to build my first box and found that the top was way too small to balance full sheets, and wouldn’t do more than 12 inch rips, so, being the cheap sob I am, I fashioned my own top out of a sheet of wood and marked out my own measurements and just screwed wood with a t square for each measurement when I had to. Short story long, the cheap Ryobi cut 45s pretty good...</p></blockquote><p></p>

Top