What is your opinion?

[chrisstanton32 10+ year member]

I have a 2011 F150 I want as much spl as possible without sacrificing sq. We were thinking of running 4 8" subs in a ported/sealed box under the seats. I have 5 and 1/2 in the back..which angles to 7 and 3/4 in the front. 12-13" deep from front to back. 57-58" wide from right to left. I am willing to do a 2'' seat lift which will make it obviously 2'' higher than those stock measurements I took. So what is that , a little over 2 cubes... anyways obviously I have less than 6" mounting depth so...

SS sli or SA-8's or DD1508's or DC lvl2 ? or 10's of those same with less subwoofer count? (open to any other suggestions)

or should I do a shallow mount? SI BM MKIII ?

sealed or ported? aeroport?

3 or 4 8's or 2 or 3 10's ? (We were thinking 4 8's but open to any other suggestions)

If 10's... which 10's are best for under 6" mounting depth? 10" SSA Icon?

If 8's I can probably fire forward because I'll have around 10" of room at the front, is it better to fire forward in my case?

If so port down or back or forward?

thinking of selling my 1250w to get a 2k watt amp..

What are your suggestions? I don't need a science lesson because I'm not sure what all of the numbers and details of each subwoofer mean so please keep it short and sweet without getting frustrated bc I'm a noob. Thank You

Click to read more...

 

[SPLaudio 5,000+ posts]

i would do 3 sa8 d2's and run ur amp at .66ohms //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[chrisstanton32 10+ year member]

i would do 3 sa8 d2's and run ur amp at .66ohms //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Dude that is the kind of responses I'm looking for ! Thank You.

Why 3 instead of 4?

You think my 1250 is enough compared to selling it and purchasing a 2k watt?

Ported?

 

[30DZ 10+ year member]

i would do 3 sa8 d2's and run ur amp at .66ohms //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

can you please clear pm's

 

[chrisstanton32 10+ year member]

any one else have an opinion?

 

[chrisstanton32 10+ year member]

i would do 3 sa8 d2's and run ur amp at .66ohms //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

I think I can only do two sa8's ported right?