Reply to thread

Message

<blockquote data-quote="SqJunkie" data-source="post: 2019471" data-attributes="member: 569724">I have a 2003 mitsubishi lancer Oz Rally with an 200amp excesive amperage altenator and im running O guage to my battery under the hood. then im running 0 guage to my battery relay then O guage to my 2 Kinetic 2400 batteries, im then running O guage to my tsnami distribution box which has a positive and negative side and im running a O guage ground off the block then im running 4 guage to my 3 crossfire amps 2 1000d&#039;s and a 804. im running 4 crossfire x6&#039;s off of the 804 and im running off 2 mtx 9500&#039;s off the 2 1000d&#039;s 1 to each. My HU is a IVA-D310 to,slim ps2, 20gig ipod in my glove box. Then i have my HU hooked up opticaly to my alpine 5.1 proccesor which is then hooked up to a audiocontrol matrix which then goes to my 3 Crossfire amps.well my question is my system plays fine but when i turn it up to like 24 or higher my bass cuts out after bought 5 mins or 1 song. my qusestion is how can i remedy this problem? I have a 2 farad tsnami cap just laying around was wondering if that would help or not. or was wondering if i need to run dual altenators my 200amp for my system and my stock 84amp for my car. Also im in the process of doing the big 3 have 0 to battery.</blockquote>

[QUOTE="SqJunkie, post: 2019471, member: 569724"] I have a 2003 mitsubishi lancer Oz Rally with an 200amp excesive amperage altenator and im running O guage to my battery under the hood. then im running 0 guage to my battery relay then O guage to my 2 Kinetic 2400 batteries, im then running O guage to my tsnami distribution box which has a positive and negative side and im running a O guage ground off the block then im running 4 guage to my 3 crossfire amps 2 1000d's and a 804. im running 4 crossfire x6's off of the 804 and im running off 2 mtx 9500's off the 2 1000d's 1 to each. My HU is a IVA-D310 to, slim ps2, 20gig ipod in my glove box. Then i have my HU hooked up opticaly to my alpine 5.1 proccesor which is then hooked up to a audiocontrol matrix which then goes to my 3 Crossfire amps. well my question is my system plays fine but when i turn it up to like 24 or higher my bass cuts out after bought 5 mins or 1 song. my qusestion is how can i remedy this problem? I have a 2 farad tsnami cap just laying around was wondering if that would help or not. or was wondering if i need to run dual altenators my 200amp for my system and my stock 84amp for my car. Also im in the process of doing the big 3 have 0 to battery. [/QUOTE]

Verification