Reply to thread

Message: <blockquote data-quote="Phoenix Risen" data-source="post: 6955076" data-attributes="member: 623425">heres the deal, im running a mbuart dsc1500.1 to my sub and an ap 20004 to the mids and highs in my 2008 tiburon, ive done the 1/0 big 3 and power wire to be back to my kenetik hc 1400, all the grounds are solid, but when i put the power to it the voltage drops down to around 12.5 at the front and back batt. and its charging at 14.7 at idle with the system offim thinking that a better batt up front may be in order, one with some better terminals on it that what comes factory on these cars, any one have any suggestions on what kind of batt i should do or if something else could be causing it.</blockquote>

Top