Reply to thread

Message

<blockquote data-quote="RumbleNTheTrunk" data-source="post: 946862" data-attributes="member: 561342"><p>Ok since I already have my amp I figured I would go ahead and install it into my truck.&nbsp; I got a &#039;94 Ford F-150 Regular cab pickup. I got a Diamond Audio D6 300.4 amp, I plan on mounting the amp underneath the seat because theres alot of space, mounting it the floorboard of the truck outtta eye&#039;s view.&nbsp; Now about the wiring, I have a 8 gauge wiring kit with all the neccessary hookups and what not.&nbsp; What wires do I run to the battery, and for those, I was thinking run them underneath the door panels on the floor, unscrew those and stick the wire under there.&nbsp; I hope to god the rca doesnt have to be ran that way, the rca cables are TRIPLE SHIELDED&nbsp; //content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif&nbsp;&nbsp; If anyone can assist me with maybe what screws I should use, i think i can fit about 3/4 screws in the holes of the amp platform, and what do yall think about teflon washers underneath to hold.&nbsp; I just want input and suggestions on the right way to do this, and how to go from the woofer and tweeter to the amp without seein the wires.&nbsp; I was thinking placing the tweeters on the rails on the side, sorry i dont know the proper name lol...any feedback would be good, im thinkin about gettin started this upcoming week..And does installing the amp sound good before getting the speakers?</p></blockquote><p></p>

[QUOTE="RumbleNTheTrunk, post: 946862, member: 561342"] Ok since I already have my amp I figured I would go ahead and install it into my truck. I got a '94 Ford F-150 Regular cab pickup. I got a Diamond Audio D6 300.4 amp, I plan on mounting the amp underneath the seat because theres alot of space, mounting it the floorboard of the truck outtta eye's view. Now about the wiring, I have a 8 gauge wiring kit with all the neccessary hookups and what not. What wires do I run to the battery, and for those, I was thinking run them underneath the door panels on the floor, unscrew those and stick the wire under there. I hope to god the rca doesnt have to be ran that way, the rca cables are TRIPLE SHIELDED [IMG]//content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif[/IMG] If anyone can assist me with maybe what screws I should use, i think i can fit about 3/4 screws in the holes of the amp platform, and what do yall think about teflon washers underneath to hold. I just want input and suggestions on the right way to do this, and how to go from the woofer and tweeter to the amp without seein the wires. I was thinking placing the tweeters on the rails on the side, sorry i dont know the proper name lol...any feedback would be good, im thinkin about gettin started this upcoming week..And does installing the amp sound good before getting the speakers? [/QUOTE]

Verification