Reply to thread

Message

<blockquote data-quote="Jakerrr" data-source="post: 8442353" data-attributes="member: 637923"><p>I got 2 of the SB Acoustics SB26STCN-C000-4 tweeters and they just happened to fit into the spot where the grille in the A pillar used to be when I took the grill out after getting frustrated trying to mount them in the factory location behind the grill. Was entirely not planning to mount them in this way but it was a very lucky coincidence they happened to fit in that rectangular opening just barely, so they are like stuck in there from the pressure of the plastic touching the body of the tweeter. If they were a mm smaller they wouldn&#039;t have worked in that way. I had to cut like a half mm of plastic to shove the right tweet in there but the left one was perfect. They look great like this. I can even swivel them around for aiming, because the body of the tweeter is only touching the plastic at 2 points. Good thing I chose these particular tweets lol. And now I don&#039;t have to eliminate the idea of other large format tweeters, they just need to have about the same inner/body diameter of these.</p></blockquote><p></p>

[QUOTE="Jakerrr, post: 8442353, member: 637923"] I got 2 of the SB Acoustics SB26STCN-C000-4 tweeters and they just happened to fit into the spot where the grille in the A pillar used to be when I took the grill out after getting frustrated trying to mount them in the factory location behind the grill. Was entirely not planning to mount them in this way but it was a very lucky coincidence they happened to fit in that rectangular opening just barely, so they are like stuck in there from the pressure of the plastic touching the body of the tweeter. If they were a mm smaller they wouldn't have worked in that way. I had to cut like a half mm of plastic to shove the right tweet in there but the left one was perfect. They look great like this. I can even swivel them around for aiming, because the body of the tweeter is only touching the plastic at 2 points. Good thing I chose these particular tweets lol. And now I don't have to eliminate the idea of other large format tweeters, they just need to have about the same inner/body diameter of these. [/QUOTE]

Verification