Reply to thread

Message

<blockquote data-quote="JoeMerchant" data-source="post: 8459792" data-attributes="member: 668373">I have a 2005 Saturn VUE with the 6-speaker option (4 in the doors with 2 tweeters in the front pillars.&nbsp; I have a JVC Arsenal KDA735BT stereo with Polk DB1001 tweeters (set up with the included crossovers and clipped wires to cut 3 dB).&nbsp; I also have four Polk DXi651s speakers in the doors.&nbsp; The speakers and the tweeters are both 4 ohms. The tweeters are pointed directly at the driver and the passenger per the door sail set up.The problem is the tweeters are still a bit louder than the rest of the speakers so whatever I hear is a bit heavy on the high end freqs.&nbsp; This isn&#039;t about EQ levels, it&#039;s volume.&nbsp; As a note, the tweeters are wired inline with the door speakers per factory wiring, though with the added polk crossover.&nbsp; I&#039;ve seen mention of resistors being added but I have no idea how to do that or where to start or what to buy.</blockquote>

[QUOTE="JoeMerchant, post: 8459792, member: 668373"] I have a 2005 Saturn VUE with the 6-speaker option (4 in the doors with 2 tweeters in the front pillars. I have a JVC Arsenal KDA735BT stereo with Polk DB1001 tweeters (set up with the included crossovers and clipped wires to cut 3 dB). I also have four Polk DXi651s speakers in the doors. The speakers and the tweeters are both 4 ohms. The tweeters are pointed directly at the driver and the passenger per the door sail set up. The problem is the tweeters are still a bit louder than the rest of the speakers so whatever I hear is a bit heavy on the high end freqs. This isn't about EQ levels, it's volume. As a note, the tweeters are wired inline with the door speakers per factory wiring, though with the added polk crossover. I've seen mention of resistors being added but I have no idea how to do that or where to start or what to buy. [/QUOTE]

Verification