Trade me your blown amps...
- Thread starter Suicide Bobb
- Live activity
- Replies 81
- Views 3K
HAH, this is the 8ohm version right? Think that PG Amp I got from Geoff should push it quite nice.
btw what are you going to do with the enclosure you have for it?
OP
- Thread Starter
- #63
Yep, 8ohm.
The enclosure cost me $150, so if you want it, something else will have to be included //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif It's a fantastic looking and very well built box. There is a build log for it too...
It does not have terminals, so it has to be mounted inverted. The cyclone performs equally well inverted as it does normal, though. This is probably because the sub itself has its own ~0.5 cubic foot enclosure (the glass cylinder).
Btw, when we meet up, we will perform the procedure for removing the magnetic dust from the internals. I need to show you how, because you will need to do it someday as it is an issue that plagues all Cyclones on more than one occasion. The last time I ran it, it was free of 99% of the dust. However, I did not put a layer of the protectant on it, so more may have fallen off. It happens regardless of whether it is being used or not.
I'll let you know tomorrow if that happens to be the case. My guess is that it's still perfectly smooth.
The enclosure cost me $150, so if you want it, something else will have to be included //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif It's a fantastic looking and very well built box. There is a build log for it too...
It does not have terminals, so it has to be mounted inverted. The cyclone performs equally well inverted as it does normal, though. This is probably because the sub itself has its own ~0.5 cubic foot enclosure (the glass cylinder).
Btw, when we meet up, we will perform the procedure for removing the magnetic dust from the internals. I need to show you how, because you will need to do it someday as it is an issue that plagues all Cyclones on more than one occasion. The last time I ran it, it was free of 99% of the dust. However, I did not put a layer of the protectant on it, so more may have fallen off. It happens regardless of whether it is being used or not.
I'll let you know tomorrow if that happens to be the case. My guess is that it's still perfectly smooth.
Didnt you get that rebuilt? how big is the box?
OP
- Thread Starter
- #65
Nope, I did the aforementioned cleaning 3 times though (took me that many times to fully clean it).
It's a sealed 2 cubic foot enclosure. I believe it's made with Trupan instead of MDF, which is more acoustically dead, stronger, and lighter. It's painted black and the corners and edges are rounded.
do you still have that Fusion amp?
Also bring the box for the clone when you come up so we can test it out ect ect.
Also bring the box for the clone when you come up so we can test it out ect ect.
OP
- Thread Starter
- #67
I do! And I'll definitely bring the box.
Snap me some photos of that Fusion amp, guts ect ect. I might have a nice PG crossover with your name on i for that amp //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
OP
- Thread Starter
- #69
I have no use for that crossover //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif
maybe so but you can sell it.
OP
- Thread Starter
- #75
What is it doing that is weird?
Activity
No one is currently typing a reply...
Similar threads
Featured
How Much AH for ~ 250 Amps
- Started by Blackout67
- General Car Audio
About this thread
