Reply to thread

Message

<blockquote data-quote="dragnix" data-source="post: 4630837" data-attributes="member: 572507">Sucks IMO. And here&#039;s why:I contacted him a while back about doing a recone for my 4hpz(since he&#039;s the one that has the voice coil). We talked about pricing and agreed on a price which I paid, for a full recone.Then 02parkave, who has the basket at the time, offered to send the basket over to Tim Roy so that I don&#039;t have to receive the basket and ship it again. The basket, btw, is a TC Sounds basket with the QCA ring. Then i told Tim to hold off on starting with the recone until he gets the basket, to which then he agree. So then a couple of weeks went by and Tim Roy got the basket and said he&#039;ll start on the recone right away, and this is where it started to **** big time.After about a 2 weeks i contacted him to ask how the recone is doing, to which I got no reply. After about three more emails, he finally decided to send me an email saying that it&#039;s done and he&#039;ll send it out. I didn&#039;t get any tracking, but the recone came to me about a week after.When i opened the box, to my surprise, the basket and the cone where not in one piece, but separate pieces instead. And the basket wasn&#039;t even cleaned off as the epoxy/glue from the last sub is still intact. Then I took a DMM to the voice coil, just to see what it reads, and it comes up as 1.5ohm DCR, even though this is supposed to be a single 1ohm vc. Now I don&#039;t consider myself very knowledgeable, but I do believe that if it&#039;s a single 1 then DCR should be lower than 1, correct me if i&#039;m wrong. And now i&#039;ve contacted him about this and still has no response.Cliffs: Recone came in from Tim Roy but was not done properly, VC doesn&#039;t seem to read the normal resistance. Tim Roy sucks dick</blockquote>

[QUOTE="dragnix, post: 4630837, member: 572507"] Sucks IMO. And here's why: I contacted him a while back about doing a recone for my 4hpz(since he's the one that has the voice coil). We talked about pricing and agreed on a price which I paid, for a full recone. Then 02parkave, who has the basket at the time, offered to send the basket over to Tim Roy so that I don't have to receive the basket and ship it again. The basket, btw, is a TC Sounds basket with the QCA ring. Then i told Tim to hold off on starting with the recone until he gets the basket, to which then he agree. So then a couple of weeks went by and Tim Roy got the basket and said he'll start on the recone right away, and this is where it started to **** big time. After about a 2 weeks i contacted him to ask how the recone is doing, to which I got no reply. After about three more emails, he finally decided to send me an email saying that it's done and he'll send it out. I didn't get any tracking, but the recone came to me about a week after. When i opened the box, to my surprise, the basket and the cone where not in one piece, but separate pieces instead. And the basket wasn't even cleaned off as the epoxy/glue from the last sub is still intact. Then I took a DMM to the voice coil, just to see what it reads, and it comes up as 1.5ohm DCR, even though this is supposed to be a single 1ohm vc. Now I don't consider myself very knowledgeable, but I do believe that if it's a single 1 then DCR should be lower than 1, correct me if i'm wrong. And now i've contacted him about this and still has no response. Cliffs: Recone came in from Tim Roy but was not done properly, VC doesn't seem to read the normal resistance. Tim Roy sucks d[COLOR=Black]ick[/COLOR] [/QUOTE]

Verification