Sold ti pro 15" quad 1.4 but one coil doesn't read so triple 1.4 :)

[HawaiianBassHed 10+ year member]

4hp motor and a couple tops, willing to sell just the motor, but I don't really know for how much... locals can get a sick deal and a box that is VERY SOLID... 12" and 15" top a single motor, and a fishman 15" grill...

$400 if anyone has an account with fedex or ups and can get it to them stupid cheap this is a deal imo... I'm negotiable within reason... not gonna do $400 shipped as it's $200ish to ship it since I'm in HI, like stated UNLESS you get deals through fedex or ups it probably isn't a good idea to have it shipped... will post pix if there's any intrest, mostly looking for a local sale. thanks,

Tom

Click to read more...

 

[casper97ta 10+ year member]

Hey Tom. I'd love some pics. I'm trying to piece together a killer loud, daily single 15 setup. Still trying to decide on what to go with. Thanks man.

 

[HawaiianBassHed 10+ year member]

last pic is the 12" top on the same motor, in the 3ft^3 box 35hz tune 45inches of port all sides dual 3/4" even slot port, port has a brace going down the middle as it still flexed with that sub in there. when I say it's loud, just take my word for it //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif it's alot louder than the 9510 in my sig vid on the low bass especially, peak it's only a little louder, but for a broad spectrum in the same box the 12" was almot more musical peaked a little louder and banged alot more lows... in a large box like 6.5ft^3 100in^2 port the 15" was fun in my truck.... it broke things from tipping over ripped the handle off my roof among some other things, so I decided I didn't want to have it in there, it was strapped with a come along and still managed to break loose and bang into things, wasn't safe to have my kid next to it for sure... 200lbs of sub box tipping over just driving I don't even want to imagine what could've happened in an accident... //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif no more stupid stuff like that for me... next large setup will be WELL fastened to the car, and it'll be in the car not the truck, truck has a pair of 1008a's... for you I'd do a partial trade but I'm not intrested in the 1008 with the black top plate only the silver //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif cause it matches mine perfectly... I suppose I could do both, but I got my pair with carbon caps for $220 shipped, so I really don't want to give too much for that pair... the grill I have alone for the 15" is $60 new+ ship... the motor is worth the another $260 imo and the tops are worth at least $100 each I just want more stuff that I'm going to use, new amps being one of them, if I manage to get Team Toxic Tuan to get me his paypal I'd love to pick up a pair of his x-fire xt1400d's....

 

[BassAddictJ 5,000+ posts]

interested in your tops. my golf and 18inch top assem are gone and im taking a differant direction with the sub size. pm me with a price shipped for either. only need 1 //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[HawaiianBassHed 10+ year member]

um, I was talking to Doug about the trade trying to justify my asking price :lol: I didn't really mean it as I'd seperate it all.

but I suppose there's no harm in selling one piece... I'd do the 12" assembly for like $80 shipped I'd like to see $100 since shipping is gonna be $30 at least but since it's not perfect I don't want to ask alot for it, the dustcap was pushed in, and I have to fix the push terminals I smooshed them trying to put it in a box by myself and cutout was really tight, so there just kinda dangling around, there was also a spot on the former where it has a bubble that was scraping the pole piece, but I pushed it out and it's been slamming fine since then, but I have a pair of replacment terminals, and should be getting my full cone blank dustcap from FI anyday now, so all that will be wrong with it soon will be the bubble that I poped out, and it's just costmetic and in the former there's some scrapes I'll take the time to get a pic of it tomorrow so you can see... if not, the 15" assembly/top is all good besides one tinsel lead going, or something as it reads 0ohms on one coil, then if I play with the probe at the tinsel where it meets the former it gets readings, but really crap ones like 10+ ohms, may just be a crappy conduction between the probe and wire.. but I'm not sure, anyhow all three other coils are reading fine right around 1.4 where their supposed to be two are at 1.4 the third was 1.3... .1 could be the meter, but I do know it also slams... that one I'd for sure like $140 for so I can get close to $100 after shipping and paypal... but again may end up costing me more which I'll eat, just letting you know that I really won't get much out of this //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif usps posts the shipping price directly on the label also ftw //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif good for customers imo so they know they're underpaying me for shipping so they know how nice of a guy I *can* be //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif oh yeah, that'd be with the stupid $50 grill.... I got it for like $25 from a member here, djman or something I don't even remember... got it and never used it... I still wouldn't mind using it if it doesn't sell and my recones don't come in from FI by next weekend I'll run the 15" at the show //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif presuming my xp1400d's come in from Tuan by then... but he really doesn't seem to say much, and I did notice he had a really negative feedback going from like 05/06 or something //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif but I suppose it's just a waiting game to see if he sends them out in time or not, if he doesn't get them out by tuesday I'll probably ask for a refund as I need amps for the show next weekend and I told him that in the begining... ANYway... lmk you can pm me if you want, I figured I'd just drop a price publicly incase anyone else wanted to know.... zuesilicious

 

[02parkave 5,000+ posts]

Jay- what happened to your golf and top assy?

 

[CRXBMPN 5,000+ posts]

Gregory, if you are in law enforcement, I feel bad for the pack of people who you associate yourself with...

nice looking 12 though //content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif

 

[02parkave 5,000+ posts]

LOL- you need to polish up that motor!//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif good luck with the sale bro!

 

[HawaiianBassHed 10+ year member]

I've never once polished my chrome rims... why would I polish a sub motor?

and wtf is that guy talking about? I'm lost here....

 

[BassAddictJ 5,000+ posts]

12 inch top is mine //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

payment pending

bump for the rest

 

[boomin spl 10+ year member]

i'll buy the motor, pm me or email me ssand187man@aol.com

 

[HawaiianBassHed 10+ year member]

I forgot all about this post lol... 12" pending, boomin spl you gots pm //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[stupify 10+ year member]

bump for a great seller

 

[HawaiianBassHed 10+ year member]

thanks for the bumps, I'm open to trades here guys also... I really would like a pair of 10"s not large ones, I don't intend to run large subs at this point, spl yes, 50+ pounds NO sick of it lol...

 

[HawaiianBassHed 10+ year member]

12" top sold and shipping out today //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif