Reply to thread

Message

<blockquote data-quote="transamtroy" data-source="post: 372112" data-attributes="member: 552405">Hey all im setting up another system in my &#039;96 T/A and i need some advice. Heres what im running:polk 6.5 components up front, ex 3560 i believe6.5 fosgates in the rear seat5.25 sony&#039;s in the rear2 diamond audio 12D4 CM3&#039;s800a2 fosgate, 2 channel powering subs now.501x fosgate , 4 channel powering highs and mids now.un-used but hooked up PPI PC2300i just got in a pair of kicker RMB8&#039;s 8&quot; single 4 ohm mid-bass speakersI need to know how i should hook this all up, i blew one of my fosgates, so im replacing the middle rears with the 8&quot; mid&#039;s. Should i maybe run them to that PPI with it turned all the way down? Im not sure. Also if i hooked up 2 more 12&#039;s and got a 1100a2 would it be possible to power all 4 efficiently off that amp considering the subs would be D4&#039;s? The two twelves now are in the far rear facing forward and if i added 2 more i would point them at the 2 existing 12&#039;s and reverse the polarity on the 2 new ones...is that a good thing to do? it seemed t work when i had 4 tens but i dont know. I just want to most sound out of this system mostly in the area of bass, i would really only like to add 2 more 12&#039;s and preferable the same brand and such so i could run all them off the same amp.Let me know what you guys think, please only reply if you know your sh!t, no offense i just dont really like stupid people.p.s. i&#039;ve got a new jensen 600 watt 4 chanel with remote bass boost i can use also, it is a good amp, though it is jensen. Thanks again!</blockquote>

[QUOTE="transamtroy, post: 372112, member: 552405"] Hey all im setting up another system in my '96 T/A and i need some advice. Heres what im running: polk 6.5 components up front, ex 3560 i believe 6.5 fosgates in the rear seat 5.25 sony's in the rear 2 diamond audio 12D4 CM3's 800a2 fosgate, 2 channel powering subs now. 501x fosgate , 4 channel powering highs and mids now. un-used but hooked up PPI PC2300 i just got in a pair of kicker RMB8's 8" single 4 ohm mid-bass speakers I need to know how i should hook this all up, i blew one of my fosgates, so im replacing the middle rears with the 8" mid's. Should i maybe run them to that PPI with it turned all the way down? Im not sure. Also if i hooked up 2 more 12's and got a 1100a2 would it be possible to power all 4 efficiently off that amp considering the subs would be D4's? The two twelves now are in the far rear facing forward and if i added 2 more i would point them at the 2 existing 12's and reverse the polarity on the 2 new ones...is that a good thing to do? it seemed t work when i had 4 tens but i dont know. I just want to most sound out of this system mostly in the area of bass, i would really only like to add 2 more 12's and preferable the same brand and such so i could run all them off the same amp. Let me know what you guys think, please only reply if you know your sh!t, no offense i just dont really like stupid people. p.s. i've got a new jensen 600 watt 4 chanel with remote bass boost i can use also, it is a good amp, though it is jensen. Thanks again! [/QUOTE]

Verification