T5002 popped

[jteske88 10+ year member]

on my way home amp went out. well today i go to put it on the bench check everything. its has 30volts on one channel and the other is normal. so i cant bridge it. any advice on what i should possibly check

Click to read more...

 

[rebelfromva 10+ year member]

So gut shots

 

[itsblown 10+ year member]

? what do you mean by 30 volts on one channel and the other is normal.

Also if it just randomly cut out on you it could of been a loose wire. But if you were pushing it hard and it just stoped it could of went into protect?

 

[jteske88 10+ year member]

guts are clean can find any issues, nothing burnt up or anything out the ordinary

 

[jteske88 10+ year member]

well idk cant get a hold of a manual, but yeah little over 30 volts on one side and the other channel will play, but the bad side if i connect speaker or load to it it will pop real loud and restart the amp

 

[Kangaroux 5,000+ posts]

Sounds like something is shorting out

 

[jteske88 10+ year member]

well thats what i was thinking too, i know there is the same volts at all legs on fets. im gonna mess with it more later, im at work

 

[itsblown 10+ year member]

Sounds like something blew inside the amp any chance its the RCA's in your car though maybe on side is shorted?

 

[jteske88 10+ year member]

no tested amp with headphone to rca from phone it will pop even with no input

 

[jteske88 10+ year member]

can anyone find a repair manual or something so i have reference to componets when testing, i cant find one