Looking for 350 plus shipping..
They are 4 inch dual 2ohm vc. I've burped them with 7500 watts each and they still were going strong.
Looking for 350 plus shipping..
They are 4 inch dual 2ohm vc. I've burped them with 7500 watts each and they still were going strong.
just curiosu, what did you hit, score wise with 7500wrms?
Actually it was more like 7100 watts. Me and Jybfan04 work together, I compared them with the dd's 9910s. To be perfectly honest, at low power the dd's won by a land slide. For two good reasons,
1. These are 4 inch vc which require more power to move
2. The excursion for a 10 is minimal at best because of the 4 inch vc.
HOWEVER, THIS IS A BIG HOWER EVER, the more power I added to the subs the t3 neoes started catching up.
This test was with a single sub set up, and remind you this is also a simple swap test, no tuning involved. I tested them on a pair of sundown 3000Ds. Both subs dual 2.
1. at 2000 watts dd 148, neo 146.5
2. at 4000 watts dd 148.7, noe 147.8
3. at 6000 watts dd 149.8, neo 149.1
4. at 7000 watts dd 150.4, neo 149.9
So as you see, the more power you give these, they began to catch up with the dds. Also, the dd9910s got warm at 7000 watts but the neos stayed cool as a fan with very little venting period!!!! Now why are these being sold, power requirements have been cut in half in the street devision. So apair of these will not do me any good. And if you decide to buy them, they will be more efficient as 15s or 18s not 10s or 12s.
Also remember, power for spl is only 10% of the issue. The other 90% depends on your set up. ASK ANY EXPERT!!! YOU CAN CALL DEMUTH AND ASk HIM!!!
1. These are 4 inch vc which require more power to move
2. The excursion for a 10 is minimal at best because of the 4 inch vc.
HOWEVER, THIS IS A BIG HOWER EVER, the more power I added to the subs the t3 neoes started catching up.
This test was with a single sub set up, and remind you this is also a simple swap test, no tuning involved. I tested them on a pair of sundown 3000Ds. Both subs dual 2.
1. at 2000 watts dd 148, neo 146.5
2. at 4000 watts dd 148.7, noe 147.8
3. at 6000 watts dd 149.8, neo 149.1
4. at 7000 watts dd 150.4, neo 149.9
So as you see, the more power you give these, they began to catch up with the dds. Also, the dd9910s got warm at 7000 watts but the neos stayed cool as a fan with very little venting period!!!! Now why are these being sold, power requirements have been cut in half in the street devision. So apair of these will not do me any good. And if you decide to buy them, they will be more efficient as 15s or 18s not 10s or 12s.
Also remember, power for spl is only 10% of the issue. The other 90% depends on your set up. ASK ANY EXPERT!!! YOU CAN CALL DEMUTH AND ASk HIM!!!
yeah, I kinda noticed //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif
No, it is a pretty big neo magnet but it is inside the metal casing. But I bought these for $600+ a piece. So I am selling them for 50% less than I bought them. As I said it was a prototype by JD. It is efficient but it may take over 7000 watts to beat the 9910s. But as 15s or 18s, they should be better than a standard sub. Remember they are 4 inch coils, and 4 inch coils are reserved for the big boyz, that can handle over 10kw's of power.//content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif
That is a huge Neo motor, too bad you do not have any 15's
who could recone this?
Demuth can recone them! I will be reconing them to either 15 or 18s, if they dont sell. Then if some one wants them, they will cost much more.//content.invisioncic.com/y282845/emoticons/greedy.gif.5a53e6246569d7ab79867170f3b06629.gif
We have 2 but pictures were taken of the worst looking one. We have a picture with both together. I will have the pix posted.
Activity
No one is currently typing a reply...
Similar threads
Featured
prototype amp? memphis CA300-4
- Started by kilagun1
- Amplifiers
About this thread
