Reply to thread

Message

<blockquote data-quote="937DYTBOI" data-source="post: 1461500" data-attributes="member: 559829">Hey i jus got my install all finished up and it seems to not be as loud as it should. First off my zapco cuts out when i turn my clarion up to 17 on the volume that can be due to a lack of power going to it i believe. I have like an 80A fuse on the zapco and my Orion 2500d dual power wires share a 200A fuse block. My problem is that i have turn my gain all the way up on my amp and turn the SW volume all the way up on my HU to receve the&nbsp; sound im looking for out of my subs, and im using the remaote gain to control the volume. Im not tryin to fry my subs by having my gain all the way up. It may be that my wiring is not right on my subs because i didnt do it my dad wanted to help me out so he decided to wire the subs up himself to save me some time while i was at school and work.My previous setup was a 18&quot; stroker and it wanged harder than these 2 12&#039;s, and my gain was like 3/4 of the way up. My setup is supposibly at 2 ohms my dad said , but was just wondering if anybody could lead me in the right direction of what to check first and if anybody hasand info on what my amp and HU should be set at that will help me out a lot so i can decifer weather my sub wiring is off.</blockquote>

[QUOTE="937DYTBOI, post: 1461500, member: 559829"] Hey i jus got my install all finished up and it seems to not be as loud as it should. First off my zapco cuts out when i turn my clarion up to 17 on the volume that can be due to a lack of power going to it i believe. I have like an 80A fuse on the zapco and my Orion 2500d dual power wires share a 200A fuse block. My problem is that i have turn my gain all the way up on my amp and turn the SW volume all the way up on my HU to receve the sound im looking for out of my subs, and im using the remaote gain to control the volume. Im not tryin to fry my subs by having my gain all the way up. It may be that my wiring is not right on my subs because i didnt do it my dad wanted to help me out so he decided to wire the subs up himself to save me some time while i was at school and work. My previous setup was a 18" stroker and it wanged harder than these 2 12's, and my gain was like 3/4 of the way up. My setup is supposibly at 2 ohms my dad said , but was just wondering if anybody could lead me in the right direction of what to check first and if anybody hasand info on what my amp and HU should be set at that will help me out a lot so i can decifer weather my sub wiring is off. [/QUOTE]

Verification