Reply to thread

Message

<blockquote data-quote="BlibbaBlob" data-source="post: 8829716" data-attributes="member: 688151">Q1. Yes, I just checked again and still no signal from the sub. Amp powers up like normal. Q2. Its not going in-n-out anymore1a. Not overheating3a. HOW DARE YOU <img class="smilie smilie--emoji" loading="lazy" alt="😭" title="😭" src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f62d.png" />2a. Just checked and they&#039;re still good3aa. I tapped into an existing ground after cleaning everything off with a wire brush and drill.4a. Power/LOC on driver sideRCA/LOC/Bass remote on pax side I&#039;ll upload some pics:-I custom built the box to specs-Wires are tucked behind backseats under velcro flaps-All LOC wiring now has shrink tubeI&#039;ll check the power/ground tmrw if I have a chance.Thanks for your help!</blockquote>

[QUOTE="BlibbaBlob, post: 8829716, member: 688151"] Q1. Yes, I just checked again and still no signal from the sub. Amp powers up like normal. Q2. Its not going in-n-out anymore 1a. Not overheating 3a. HOW DARE YOU 😭 2a. Just checked and they're still good 3aa. I tapped into an existing ground after cleaning everything off with a wire brush and drill. 4a. Power/LOC on driver side RCA/LOC/Bass remote on pax side I'll upload some pics: -I custom built the box to specs -Wires are tucked behind backseats under velcro flaps -All LOC wiring now has shrink tube I'll check the power/ground tmrw if I have a chance. Thanks for your help! [/QUOTE]

Verification