Reply to thread

Message: <blockquote data-quote="CSCStang" data-source="post: 8471417" data-attributes="member: 660529"><p>Bottom sketch up will work best, but move the sub cut out all the way forward so it's not near the port mouth. You may have to have port rear firing if you don't want the sub right below your face and arm. I'd bump up the port area and port per just a little for the SA. I'd also shoot for 3.5 net cubes. You'll also need to add 3 to your common walls, that will change net volume and tuning some. Adjust accordingly.</p></blockquote><p></p>

Top