Reply to thread

Message: <blockquote data-quote="Massive spl" data-source="post: 8475349" data-attributes="member: 666725"><p>You need to have it set up so it does clean power. If you have your settings wrong you prly burnt a tinsel lead or voice coil and it's sending your amp into protect... Your gain needs to match your HU rca voltage and clean volume before clipping. Your bassboost should be OFF/Zero.. Your lpf should be around 80-100hz. Sub sonic should be a few hz lower then your boxes tuning,idk you could have sealed box.</p></blockquote><p></p>

Top