Reply to thread

Message

<blockquote data-quote="EFighter808" data-source="post: 8882860" data-attributes="member: 692416">I’ve been out of the sound game since high school so it’s been about 29 years since I did. But I recently installed subs into my truck and had a fairly new used 12” Rockford subs, a brand new boss amp (I know it’s a generic brand but tried to get the quickest amp I could find) and a china made stereo deck because it was the only one I could find that had the screen that I wanted. <a href="https://www.ebay.com/itm/356011824553?mkcid=1&amp;mkrid=711-53200-19255-0&amp;siteid=0&amp;customid=link&amp;campid=5335951755&amp;toolid=20001&amp;mkevt=1" target="_blank">https://www.ebay.com/itm/356011824553?mkcid=1&amp;mkrid=711-53200-19255-0&amp;siteid=0&amp;customid=link&amp;campid=5335951755&amp;toolid=20001&amp;mkevt=1</a> this deck came with a wire harness specific for my truck. Also no instructions were provided and I basically had to plug in whatever fit correctly.I know for sure I hooked up all sound systems correctly from the subs all the way to the deck. The deck only has one green RCA cable that’s labeled subwoofer. I bought a y split and hooked it up and nothing to the subs. I also found 2 RCA cables that was labeled audio out L and audio out R, which I hooked it up to but still nothing. The stereo is working completely fine and I changed the sound setting to have the subwoofers play but still nothing. Does anyone know how I can check to see everything after the deck is working properly? I checked ohms on the subs and both were reading 4 ohms. So the woofers itself should play some sort of sound.</blockquote>

[QUOTE="EFighter808, post: 8882860, member: 692416"] I’ve been out of the sound game since high school so it’s been about 29 years since I did. But I recently installed subs into my truck and had a fairly new used 12” Rockford subs, a brand new boss amp (I know it’s a generic brand but tried to get the quickest amp I could find) and a china made stereo deck because it was the only one I could find that had the screen that I wanted. [URL]https://www.ebay.com/itm/356011824553?mkcid=1&mkrid=711-53200-19255-0&siteid=0&customid=link&campid=5335951755&toolid=20001&mkevt=1[/URL] this deck came with a wire harness specific for my truck. Also no instructions were provided and I basically had to plug in whatever fit correctly. I know for sure I hooked up all sound systems correctly from the subs all the way to the deck. The deck only has one green RCA cable that’s labeled subwoofer. I bought a y split and hooked it up and nothing to the subs. I also found 2 RCA cables that was labeled audio out L and audio out R, which I hooked it up to but still nothing. The stereo is working completely fine and I changed the sound setting to have the subwoofers play but still nothing. Does anyone know how I can check to see everything after the deck is working properly? I checked ohms on the subs and both were reading 4 ohms. So the woofers itself should play some sort of sound. [/QUOTE]

Verification