Reply to thread

Message: <blockquote data-quote="ballenm04" data-source="post: 2338255" data-attributes="member: 559309"><p>They were originally run as each vc to its own channel. Also I originally had them at 4ohm, when we put power to them they rattled. I had the problem before so I changed the wiring to 2ohm and they are clear. The only problem is that they cut out when they get a decent load. After doing some research I found out that the factory subs are rated at 1.25ohm. So I know that they can handle the 2ohm that they are currently wired at.</p></blockquote><p></p>

Top