Reply to thread

Message: <blockquote data-quote="1aespinoza" data-source="post: 8819735" data-attributes="member: 654802">Try this, wire only one positive and one negative. Sweep the balance left to right. If the sub stops working when on either side, then only keep one side connected.*This next step is experimental, so up to if you wish to proceed.   If there is no change, then connect one of the positives to the negative of the wires coming from the amp (this is called bridging an amplifier). Then the remaining wires go to the sub. Raise the volume slow to see if you have sound and that there are no funny noises.</blockquote>

Top