Reply to thread

Message

<blockquote data-quote="Winter_C" data-source="post: 6741809" data-attributes="member: 613961">Ok, So I read the manual and figured out how to strap them...but still confused on a few thingsI am strapping 2 Kicker KX1200s to 3 Rockford P3s that are at 2.67 ohms.Here is the manual if you would like to see: <a href="http://www.kicker.com/sites/default/files/04KX%20400-600-1200_1%20Amplifiers.pdf" target="_blank">http://www.kicker.com/sites/default/files/04KX%20400-600-1200_1%20Amplifiers.pdf</a>&nbsp;&nbsp; (Page 6 for Amp Strapping)But in that it shows only 1 set of RCA&#039;s going into first amp, but not into 2nd...So I only need 1 set ran?And could someone explain what the &quot;Strapping&quot; input on the amps actully do? I talked to a Kicker dealer here in my hometown yesterday and he had never actully strapped amps, he told me just to run 1 coil off each sub to one amp and other coil to other amp, I know that would work....But doing it that way you have to have each amp EXACTLY matched or risk frying a coil....So I am wondering how setting these amps up works now with the strapping cables?If someone could explain, I would be very appreciative.</blockquote>

[QUOTE="Winter_C, post: 6741809, member: 613961"] Ok, So I read the manual and figured out how to strap them...but still confused on a few things I am strapping 2 Kicker KX1200s to 3 Rockford P3s that are at 2.67 ohms. Here is the manual if you would like to see: [URL="http://www.kicker.com/sites/default/files/04KX%20400-600-1200_1%20Amplifiers.pdf"]http://www.kicker.com/sites/default/files/04KX%20400-600-1200_1%20Amplifiers.pdf[/URL] (Page 6 for Amp Strapping) But in that it shows only 1 set of RCA's going into first amp, but not into 2nd...So I only need 1 set ran? And could someone explain what the "Strapping" input on the amps actully do? I talked to a Kicker dealer here in my hometown yesterday and he had never actully strapped amps, he told me just to run 1 coil off each sub to one amp and other coil to other amp, I know that would work....But doing it that way you have to have each amp EXACTLY matched or risk frying a coil....So I am wondering how setting these amps up works now with the strapping cables? If someone could explain, I would be very appreciative. [/QUOTE]

Verification