stetsom 2k6d power/ground input

[thegreatestpenn 5,000+ posts]

quick question, what size wire does the stetsom 2k6d take in the power/ground terminals? 1/0 or 4ga.? can't really tell when looking at it and nothing on the website nor on a search. thanks

Click to read more...

 

[sundownz Pro Seller]

Probably 4 gauge - get adapters to run 1/0 in it.

 

[thegreatestpenn 5,000+ posts]

thanks mr. fuller.

 

[sundownz Pro Seller]

The 2k5d that I've seen had 4 awg inputs and wouldn't quite hold a stinger 4 awg adapter as it was a bit too narrow - you would have to grind the adapter a bit to use it.

 

[thegreatestpenn 5,000+ posts]

noted.

 

[denali804 10+ year member]

the 2k6d takes 4ga. I used distro blocks that had 1/0 in and 4 ga out. I also have a set of 1/0-4ga adapters that I never used that would work also. I would get the 1/0 as close as possible to the amp and then run a very short piece of 4ga.

 

[dtbrown 10+ year member]

I may be wrong but last I saw I thought the 2k6d had larger inputs for power and ground. Reason being is I use 1/0 to 4ga reducers and when I last hooked it up to my car a couple months ago it fit fine with extra play unlike the 2k5d which used a smaller 4g and is a very snug fit but it fits. But I'm 90% it's larger. It may not be 1/0 but maybe 2 gauge.

 

[dtbrown 10+ year member]

It is larger for sure then 4ga. Take a look at this pic I took a while ago. 2k5d uses a 4ga with smaller alan screws and the 2k6d and 4k2d are larger in size and alan heads.