Reply to thread

Message: <blockquote data-quote="helotaxi" data-source="post: 1495375" data-attributes="member: 550915">In theory, you would be running 1 ohm per channel final load (same as bridged @ 2 ohm).  The left and right subs would be getting a paltry 267 watts each and the center would be getting 1067W.  Result will be a ton of cancellation and a crappy sound.  That is WAY the wrong amp for 3 of those subs.  You would probably get better sound from just one sub on that amp than the 3 wired as you propose if you are dead set on that amp.  If the amp is not a done deal and you have the subs, find a better amp for the job, preferrably one that can handle a 1 ohm mono load and put out a good amount of power.And IIRC the difference between the 400 and the 400X is a built in crossover not more power.</blockquote>

Top