Reply to thread

Message: <blockquote data-quote="phantom240" data-source="post: 1980307" data-attributes="member: 562504"><p>Okay, i ran into a problem... i think i didnt use enough hardener on the first layer of resin... is that going to be a huge problem? Or maybe i jsut layered on too much glass and resin at once? I took the enclosure skeleton out to inspect it cuz it seemed rigid enough not to get deformed, and noticed that it wanted to separate from the tape... this got me thinking that maybe i didnt use enough hardener on the first batch, and that by adding more resin and glas on top it wasnt allowed to fully cure? IS this going to be a big problem? I was thinking that if i remove the tape that maybe it would help it cure? or could i just mix up a batch of super hardener rich resin and apply it over the not cured areas and maybe the hardener would mix with the other resin and help it cure? Or do i have to start over AGAIN?</p></blockquote><p></p>

Top