Reply to thread

Message

<blockquote data-quote="agcelica" data-source="post: 8398049" data-attributes="member: 664119">Hey guys, so after alot of though and reading i settled on the SSA GCON since the ICON was just out of budget. I am modeling the sub in winisd and i am trying to decide between a ported 10&quot; or a sealed 12&quot;. I do not believe that I will have enough room to port the 12 since this will all be going in the hatch of a celica. The 12&quot; has modeled very good sealed at 1.5 ft^3. But i am having trouble with the ported 10. Right now I have it at about 1.5 ft^3 at about 26hz for a flat response to about 28hz and an f3 at 23hz. Excursion looks good except I am having trouble with group delay and port velocity. If anybody has any recommendations or has run an enclosure for the 10&quot; any input is appreciated. I listen to mostly country, hard rock, and classic rock so i am biased toward the sealed but everybody on here recommends ported so i figured i should give it a shot.Thanks guys</blockquote>

[QUOTE="agcelica, post: 8398049, member: 664119"] Hey guys, so after alot of though and reading i settled on the SSA GCON since the ICON was just out of budget. I am modeling the sub in winisd and i am trying to decide between a ported 10" or a sealed 12". I do not believe that I will have enough room to port the 12 since this will all be going in the hatch of a celica. The 12" has modeled very good sealed at 1.5 ft^3. But i am having trouble with the ported 10. Right now I have it at about 1.5 ft^3 at about 26hz for a flat response to about 28hz and an f3 at 23hz. Excursion looks good except I am having trouble with group delay and port velocity. If anybody has any recommendations or has run an enclosure for the 10" any input is appreciated. I listen to mostly country, hard rock, and classic rock so i am biased toward the sealed but everybody on here recommends ported so i figured i should give it a shot. Thanks guys [/QUOTE]

Verification