spl

[CAT MAN 5,000+ posts]

you have to know the way of the pup to understand //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

 

[Mr.sparkle 10+ year member]

bass note and the fuse blows (60 amp) also no louder Help!!!!!

 

[CAT MAN 5,000+ posts]

bass note and the fuse blows (60 amp) also no louder Help!!!!!

//content.invisioncic.com/y282845/emoticons/rotflol.gif.b453361716769b8110ddefc85ff03cd2.gif you tried it? guess you're serious....

 

[ahole-ic]

bass note and the fuse blows (60 amp) also no louder Help!!!!!

Epic win

 

[wickedwitt 10+ year member]

I want to know why he blows a 60A fuse on that setup. You are drawing WAY too much amperage, or your voltage is dropping to insane numbers. Start from the alt, check voltage and every connection with the stereo off. That is round 1 of many rounds of fixing this thing.

 

[Jakerrr 10+ year member]

He is trolling hard, or just doesn't know how to wire. You probably have a dvc wired in series instead of parallel and the amp sees a large ohm load.

 

[ahole-ic]

I want to know why he blows a 60A fuse on that setup. You are drawing WAY too much amperage, or your voltage is dropping to insane numbers. Start from the alt, check voltage and every connection with the stereo off. That is round 1 of many rounds of fixing this thing.

That amp draws tons of current and has virtually no output. it's one of the most inefficient amps ever designed. It would start a fire much easier than power a subwoofer.

 

[Mr.sparkle 10+ year member]

lol that amp has 4 -40 amp fuses in the end ! .0 gauge and 2 gauge everywhere 2 battery holds 14 volts on the notes 127 db head unit powers line drivermono signal. 8v head unit driver and amp on have a dedicated power line high quality cable and connections throughout .... ps i am a mechanical electrical engineer .big bass is witch craft!!

 

[Falcons 5,000+ posts]

lulz itt

 

[ahole-ic]

lol that amp has 4 -40 amp fuses in the end ! .0 gauge and 2 gauge everywhere 2 battery holds 14 volts on the notes 127 db head unit powers line drivermono signal. 8v head unit driver and amp on have a dedicated power line high quality cable and connections throughout .... ps i am a mechanical electrical engineer .big bass is witch craft!!

You're doing it wrong.

 

[Mr.sparkle 10+ year member]

2x 1 ohm load as per spec to amp .what am i doing wrong?

 

[Mr.sparkle 10+ year member]

You're doing it wrong.

what am i doing wrong ???

 

[05fronty 5,000+ posts]

engrish

 

[Mr.sparkle 10+ year member]

engrish

engrish is supposed to meen what ? i thought you guys might help

 

[9515ROB 10+ year member]

dude i use to have the same set up no joke hahaha.... O wow. That was back when i knew it all lol.